Chapter 4 Tutorial
Figure 12 Tutorial: Example MBSSID Setup
The standard network (SSID04) has access to all resources. The VoIP network (VoIP_SSID) has access to all resources and a high Quality of Service (QoS) setting (see Chapter 6 on page
83for information on QoS). The guest network (Guest_SSID) has access to the Internet and the network printer only, and a low QoS setting.
To configure these settings, you need to know the MAC (Media Access Control) addresses of the devices you want to allow users of the guest network to access. The following table shows the addresses used in this example.
Table 4 Tutorial: Example Information
Network router (A) MAC address | 00:AA:00:AA:00:AA |
|
|
Network printer (B) MAC address | AA:00:AA:00:AA:00 |
|
|
Log in to the ZyXEL Device (see Section 2.1 on page 41). Click WIRELESS > Wireless. The Wireless screen appears. In this example, the ZyXEL Device is using Access Point operating mode, and is currently set to use the SSID04 profile.
52 |
| |
ZyXEL |
| |
|
|
|