|
|
| Chapter 17 Maintenance |
| Table 77 | Firmware Upload | |
| LABEL |
| DESCRIPTION |
| Browse... |
| Click Browse... to find the .bin file you want to upload. Remember that you must |
|
|
| decompress compressed (.zip) files before you can upload them. |
|
|
|
|
| Upload |
| Click Upload to begin the upload process. This process may take up to two |
|
|
| minutes. |
|
|
|
|
Do not turn off the ZyXEL Device while firmware upload is in progress!
After you see the Firmware Upload in Process screen, wait two minutes before logging into the ZyXEL Device again.
Figure 134 Firmware Upload In Process
The ZyXEL Device automatically restarts in this time causing a temporary network disconnect. In some operating systems, you may see the following icon on your desktop.
Figure 135 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the System Status screen.
If the upload was not successful, the following screen will appear. Click Return to go back to the F/W Upload screen.
| 203 |
ZyXEL | |
|
|