ZyXEL Communications NWA-3160 Series manual 71

Chapter 4 Tutorial

Figure 38 Tutorial: Layer-2 Isolation Edit

Enter the network router’s MAC Address and add a Description (“NET_ROUTER” in this case) in Set 1’s entry.

Enter server 1’s MAC Address and add a Description (“SERVER_1” in this case) in Set 2’s entry.

Change the Profile Name to “L-2-ISO_SERVER_1” and click Apply. You have restricted users on the SERVER_1 network to access only the devices with the MAC addresses you entered.

4Click the MAC Filter tab. When the MAC Filter screen appears, select macfilter03’s entry and click Edit.

Enter the MAC address of the device Alice uses to connect to the network in Set 1’s MAC Address field and enter her name in the Description field, as shown in the following figure. Change the Profile Name to “MacFilter_SERVER_1”. Select Allow Association from the Filter Action field and click Apply.

Figure 39 Tutorial: MAC Filter Edit (SERVER_1)

You have restricted access to the SERVER_1 network to only the networking device whose MAC address you entered. The SERVER_1 network is now configured.

	71
ZyXEL NWA-3160 Series User’s Guide