ZyXEL Communications NWA-3160 Series manual 73

Chapter 4 Tutorial

Figure 40 Tutorial: SSID Profiles Activated

2Next, click the SSID tab. Check that each configured SSID profile uses the correct Security, Layer-2 Isolation and MAC Filter profiles, as shown in the following figure.

Figure 41 Tutorial: SSID Tab Correct Settings

If the settings are not as shown, follow the steps in the relevant section of this tutorial again.

4.4.6.2 Testing the Configuration

Before you allow employees to use the network, you need to thoroughly test whether the setup behaves as it should. Take the following steps to do this.

1Test the SERVER_1 network.

•Using Alice’s computer and wireless client, and the correct security settings, do the following.

Attempt to access Server 1. You should be able to do so. Attempt to access the Internet. You should be able to do so.

Attempt to access Server 2. You should be unable to do so. If you can do so, layer-2 isolation is misconfigured.

•Using Alice’s computer and wireless client, and incorrect security settings, attempt to associate with the SERVER_1 network. You should be unable to do so. If you can do so, security is misconfigured.

	73
ZyXEL NWA-3160 Series User’s Guide