Chapter 25 System Maintenance and Information

Figure 164 Valid CI Commands

Copyright (c) 1994 - 2007 ZyXEL Communications Corp.

NWA-3160> help or ?

Valid commands are:

ether

wlan

sys

exit

ip

bridge

bm

certificates

radius

8021x

radserv

wcfg

rogueAP

 

 

 

NWA-3160>

 

 

 

25.1.1Command Syntax

•The command keywords are in courier new font.

•Enter the command keywords exactly as shown, do not abbreviate.

•The required fields in a command are enclosed in angle brackets <>.

•The optional fields in a command are enclosed in square brackets [].

•The symbol means or. For example,

sys filter netbios config <type> <onoff>

means that you must specify the type of netbios filter and whether to turn it on or off.

25.1.2Command Usage

A list of valid commands can be found by typing help or ? at the command prompt. Always type the full command. Type exit to return to the SMT main menu when finished.

25.1.3 Brute-Force Password Guessing Protection

The following describes the commands for enabling, disabling and configuring the brute-force password guessing protection mechanism for the password.

Table 91 Brute-Force Password Guessing Protection Commands

COMMAND

DESCRIPTION

sys pwderrtm

This command displays the brute-force guessing password protection settings.

 

 

sys pwderrtm 0

This command turns off the password’s protection from brute-force guessing. The

 

brute-force password guessing protection is turned off by default.

 

 

sys pwderrtm N

This command sets the password protection to block all access attempts for N (a

 

number from 1 to 60) minutes after the third time an incorrect password is entered.

 

 

25.1.3.1 Configuring Brute-Force Password Guessing Protection: Example

sys pwderrtm 5

This command sets the password protection to block all access attempts for five minutes after the third time an incorrect password is entered.

236

 

ZyXEL NWA-3160 Series User’s Guide