Agilent Technologies 5951-2826, 5951-2827 manual Resistance Slew Rate, Overshoot

Table 1-2. Supplemental Characteristics (continued)

Voltage Slew Rate:

	6060B (0 to 60V)	6063B (0 to 240V)	Transition
Rate #	Voltage Step	Voltage Step	Time*
1	1 V/ms	4 V/ms	8.0 ms
2	2.5 V/ms	10 V/ms	3.2 ms
3	5 V/ms	20 V/ms	1.6 ms
4	10 V/ms	40 V/ms	800 μs
5	25 V/ms	100 V/ms	320 μs
6	50 V/ms	200 V/ms	160 μs
7	0.1 V/μs	0.4 V/μs	100 μs
8	0.25 V/μs	1 V/μs	100 μs
9	0.5 V/μs	2 V/μs	100 μs

*Transition time is based on low capacitance current source.

Resistance Slew Rate
Low Range:	Uses the value programmed for the voltage slew rate.
Middle and High Ranges:	Uses the value programmed for the current slew rate.
TRANSIENT CURRENT OVERSHOOT (When programmed from 0A):
Model 6060B
Range	Transient Current Level	Current Slew Rate		Overshoot*
60 A	6-60 A		All slew rates	0
	3 A	I A/μs to 5 A/μs		1%
	3 A	I A/ms to 0.5 A/μs		0
6 A	6 A		All slew rates	0
	3 A	0.25	A/μs and 0.5 A/μs	1%
	3 A	0.1 A/ms to 0.1 A μs		0
Model 6063B
Range	Transient Current Level	Current Slew Rate		Overshoot*
10A	2-10 A		All slew rates	0
	0.5 A	0.17	A/μs to 0.83 A/μs	5%
	0.5 A	0.17	A/ms to 42 A/ms	0
	1 A		0.83 A/μs	1%
	1 A	0.17	A/ms to 0.17 A/μs	0
1 A	0.5 A		83 A/ms	4%
	0.5 A	17	A/s to 17 A/ms	0
	1 A		All slew rates	0

*All overshoot values assume a total inductance of 1 μH, or less, in the load leads connected to the D.U.T. For Model 6060B, overshoot may be higher during first five seconds of programming if the unit has been operating at full current.

16 General Information