Intel Itanium 2 Processor manual Connection for Unused Pins Sheet 2, System Management Signals

Electrical Specifications

Table 2-26. Connection for Unused Pins (Sheet 2 of 2)

Pins/Pin Groups	Recommended	Notes
	Connections
System Management Signals
3.3V	GND
SMA[2:0]	N/C
SMSC	N/C
SMSD	N/C
SMWP	N/C
THRMALERT#	H	1, 4
LVTTL Power Pod Signals
OUTEN	Must be used
PPODGD#	Must be used
CPUPRES#	Must be used
Reserved Pins
N/C	N/C
NOTES:

1.L = GND, H = VCTERM.

2.AGTL+ output signals SBSY[0:1]#, DBSY[0:1]#, and DRDY[0,1]# may be left as N/C if not used on platform.

3.Should be properly terminated through a resistor.

4.THRMALERT# should be pulled up to 3.3V through a resistor.

36 Datasheet