Intel 5100 manual Tdg

Page 2

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.

UNLESS OTHERWISE AGREED IN WRITING BY INTEL, THE INTEL PRODUCTS ARE NOT DESIGNED NOR INTENDED FOR ANY APPLICATION IN WHICH THE FAILURE OF THE INTEL PRODUCT COULD CREATE A SITUATION WHERE PERSONAL INJURY OR DEATH MAY OCCUR.

Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions marked “reserved” or “undefined.” Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The information here is subject to change without notice. Do not finalize a design with this information.

The products described in this document may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request.

Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.

Copies of documents which have an order number and are referenced in this document, or other Intel literature, may be obtained by calling 1-800-548- 4725, or by visiting Intel’s Web Site.

Intel processor numbers are not a measure of performance. Processor numbers differentiate features within each processor family, not across different processor families. See http://www.intel.com/products/processor_number for details.

BunnyPeople, Celeron, Celeron Inside, Centrino, Centrino Inside, Centrino logo, Core Inside, FlashFile, i960, InstantIP, Intel, Intel logo, Intel386, Intel486, IntelDX2, IntelDX4, IntelSX2, Intel Atom, Intel Atom Inside, Intel Core, Intel Inside, Intel Inside logo, Intel. Leap ahead., Intel. Leap ahead. logo, Intel NetBurst, Intel NetMerge, Intel NetStructure, Intel SingleDriver, Intel SpeedStep, Intel StrataFlash, Intel Viiv, Intel vPro, Intel XScale, Itanium, Itanium Inside, MCS, MMX, Oplus, OverDrive, PDCharm, Pentium, Pentium Inside, skoool, Sound Mark, The Journey Inside, Viiv Inside, vPro Inside, VTune, Xeon, and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.

*Other names and brands may be claimed as the property of others. Copyright © 2008, Intel Corporation. All rights reserved.

Intel® 5100 Memory Controller Hub Chipset for Communications, Embedded, and Storage Applications

TDG

July 2008

2

Order Number: 318676-003US

Image 2
Contents Thermal/Mechanical Design Guide Revision 003USTDG Contents Figures TablesDate Revision Description Revision HistoryRevision Number Descriptions Introduction Design FlowTerm Definition Definition of TermsDefinition of Terms Document Document Number/URL Related DocumentsRelated Documents Sheet 1 Related Documents Sheet 2 Packaging TechnologyThermal Simulation MCH Package Dimensions Top View MCH Package Dimensions Side ViewMCH Package Dimensions Bottom View Package Mechanical RequirementsThermal Design Power TDP Thermal SpecificationsThermal Solution Requirements Case TemperatureProcessor Thermal Characterization Parameter Relationships Example 1. Calculating the Required Thermal Performance105 Supporting Test Equipment Thermal MetrologyMCH Case Measurement Required Heatsink Thermal Performance Ψ CAThermocouple Attach Support Equipment Thermal Calibration and ControlsIHS Groove IHS Groove Dimensions Thermocouple Conditioning and Preparation Thermocouple Attachment to IHSSecuring Thermocouple Wires with Kapton Tape Prior to Attach Thermocouple Bead Placement Using 3D Micromanipulator to Secure Bead Location Curing Process Applying Adhesive on Thermocouple BeadThermocouple Wire Management Thermocouple Wire Management in GrooveReference Thermal Solution Power Simulation SoftwareMechanical Design Envelope AdvancedTCA* Reference HeatsinkThermal Performance Board-level Components Keepout Dimensions Torsional Clip Heatsink Thermal Solution AssemblyMechanical Interface Material Heatsink OrientationExtruded Heatsink Profiles Thermal Interface MaterialReliability Guidelines Heatsink ClipClip Retention Anchors Reliability Guidelines CompactPCI* Reference HeatsinkComponent Overview Test Requirement Pass/Fail CriteriaReliability Requirements Thermal Solution Performance CharacteristicsReliability Guidelines Drawing Description Appendix a Mechanical DrawingsMechanical Drawing List AdvancedTCA* Heatsink Assembly Drawing AdvancedTCA* Heatsink Drawing AdvancedTCA* Component Keepout Zone CompactPCI* Heatsink Assembly Drawing CompactPCI* Heatsink Drawing CompactPCI* Component Keepout Zone Torsional Clip Heatsink Clip Drawing TIM2 Drawing Appendix B Thermal Solution Component Suppliers MCH Torsional Clip Heatsink Thermal Solution