About This Document | 1 |
1.1Reference Documentation
| For the latest revision and documentation number, contact your Intel representative. | |
Table 1. | Reference Documents |
|
|
|
|
| Document | Intel Document Number or Source |
|
|
|
| Intel® Artisea | 273603 |
| Intel® Artisea | 273595 |
| Intel® Packaging Databook | 240800 |
| Printed Circuit Board (PCB)Test Methodology User’s Guide, | 298179 |
| http://developer.intel.com/design/chipsets/ | |
| Revision 1.6 | |
| applnots/298179.htm | |
|
| |
|
|
|
| Terminating Differential Signals on PCBs, by Steve Kaufer and | http://www.pcdmag.com |
| Kelee Crisafulli. Printed Circuit Design Magazine, March 1999 | |
|
| |
|
|
|
1.2Terminology and Definitions
Table 2. | Terminology and Definition (Sheet 1 of 3) | ||||||
|
|
|
|
|
|
|
|
| Term |
|
|
|
| Definition | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Stripline in a PCB is composed of the |
|
|
|
|
|
|
| conductor inserted in a dielectric with GND |
|
|
|
|
|
|
| planes to the top and bottom. |
| Stripline |
|
|
|
|
| NOTE: An easy way to distinguish stripline |
|
|
|
|
|
| ||
|
|
|
|
|
|
| |
|
|
|
|
|
|
| from microstrip is that you need to |
|
|
|
|
|
|
| strip away layers of the board to view |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| the trace on stripline. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Microstrip in a PCB is composed of the |
|
|
|
|
|
|
| |
| Microstrip |
|
|
|
|
| conductor on the top layer above the |
|
|
|
|
|
|
| dielectric with a ground plane below |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| Material used for the lamination process of manufacturing PCBs. It consists of a layer of | |||||
| Prepreg | epoxy material that is placed between two cores. This layer melts into epoxy when heated | |||||
|
| and forms around adjacent traces. | |||||
|
|
|
|
|
|
| |
| Core | Material used for the lamination process of manufacturing PCBs. This material is two sided | |||||
| laminate with copper on each side. The core is an internal layer that is etched. | ||||||
|
| ||||||
|
|
|
|
|
|
|
|
Design Guide | 9 |