Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300 | Revision A |
Table 5-4. Required Adjustment List
Priority |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | |
Adjustment Item | EEPROM data copy |
|
| Waste ink pad counter |
|
| Top margin adjustment | First dot position adjustment | Head angular adjustment | CR motor heat protection control |
| |||
Part Name |
| Initial setting | USB ID input | Ink charge | Head ID input | PF adjustment | ||||||||
|
| |||||||||||||
Upper paper guide | Remove | O | O | O | O | O | ||||||||
Replace | O | O | O | O | O | |||||||||
| ||||||||||||||
PF roller | Remove | O | O | O | O | O | ||||||||
Replace | O | O | O | O | O | |||||||||
| ||||||||||||||
Waste ink pad | Remove | O | O | O | O | |||||||||
Replace | O | O | O | O | O | |||||||||
| ||||||||||||||
Ink System | Remove | O | O | O | O | O | ||||||||
Replace | O | O | O | O | O | |||||||||
| ||||||||||||||
PF Motor | Remove | O | O | O | O | O | ||||||||
Replace | O | O | O | O | O | |||||||||
| ||||||||||||||
PF Encorder/PF Scale | Remove | O | O | O | O | O | ||||||||
Replace | O | O | O | O | O | |||||||||
| ||||||||||||||
CR Scale | Remove | O | O | O | O | O | ||||||||
Replace | O | O | O | O | O | |||||||||
|
CAUTION
When the EEPROM data copy is impossible with the main board that needs to be replaced, the Waste Ink Pad must be replaced after replacing the main board with a new one.
After all required adjustments are completed, use the “Final check pattern print” function to print all adjustment patterns for final check. If you find a problem with the printout patterns, carry out the adjustment again.
When using a new main board for replacing the Printer Mechanism, the initial setting must have been made to the main board.
<Meaning of the marks in the table>
“O” indicates that the adjustment must be carried out.
If you have removed or replaced multiple parts, make sure to check the required adjustments for all the parts. And when multiple adjustments must be carried out, be sure to carry them out in the order given in the “Priority” row.
ADJUSTMENT | Adjustment Items and Overview | 104 |