Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300 | Revision A |
Table
Occurrence
timing
CR position
Detailed phenomenon
Defective
unit/part name
Check point
Remedy
•Power on
•Inside HP
After the printer detects that the carriage is at the home position, an error is displayed.
1. | Check if Ink Cartridge is properly installed. | 1. | Install the Ink Cartridge properly. |
|
|
|
|
2. | Check if the Memory Chip is disconnected or chipped. | 2. | Replace the Ink Cartridge with a new one. |
Ink Cartridge
Memory Chip
1. Check if the Head FFC is connected correctly to the | 1. Connect the Head FFC to the connector on the | ||
connector on the CR Contact Module. | CR Contact Module. | ||
|
|
|
|
| CR Contact Module is behind |
|
|
| Holder Contact Assy. |
|
|
|
|
|
|
CR Contact Module
|
|
|
|
|
| Head FFC |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| Connector |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 2. | Check if the CSIC Board is damaged. | 2. | Replace the CR Contact Module with a new | ||||
|
|
|
|
|
|
|
| one. |
|
|
|
|
|
|
|
|
|
| 3. | Check if the Contact Assy is damaged. | 1. | Replace the Contact Assy with a new one. |
Contact Assy
Contact Assy
TROUBLESHOOTING | Error Indications and Fault Occurrence Causes | 43 |