Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300 | Revision A |
Table 3-4. Check point for Paper jam error according to each phenomenon
Occurrence
timing
CR position
Detailed phenomenon
Defective
unit/part name
Check point
Remedy
•Operation
•–
2. Check if the Wheel Star Metal, Spring Star Wheel and | 2. Reassemble the Wheel Star Metal, Spring Star |
Wheel Star Exit come off. | Wheel and Wheel Star Exit correctly. |
| EJ Frame Assy* |
| |
|
|
|
|
|
| Wheel Star Metal |
|
|
| Spring Star Wheel |
|
The top edge of paper does not go |
| Wheel Star Exit |
|
|
|
| |
through between the EJ Roller Unit and | 1. Check if the EJ Roller is correctly assembled. | 1. Reassemble the EJ Roller correctly. | |
the EJ Frame Assy. |
|
|
|
EJ Roller*
EJ Roller
2. | Check if the EJ Roller Gear is damaged. | 2. | Replace the EJ Roller Gear with a new one. | ||
1. | Check if the Upper Paper Guides correctly assembled. | 1. | Reassemble the Upper Paper Guide to the Main | ||
|
|
|
|
| Frame correctly. |
|
|
|
|
|
|
|
| Upper Paper Guide |
|
|
|
The top edge of paper is not loaded to the | Upper Paper Guide* |
PF Roller Unit. |
|
Note * : In case that the paper jam error occurs in each operation, the jammed paper contacts the nozzle surface of the Printhead and the Printhead may be damaged.
TROUBLESHOOTING | Error Indications and Fault Occurrence Causes | 39 |