Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300 | Revision A |
Table
Occurrence
timing
CR position
Detailed phenomenon
Defective
unit/part name
Check point
Remedy
•Power on
•Anywhere
When turning on the power, the printer does not operate at all.
Panel Unit | 1. | Check if the Panel FFC is damaged. | 1. | Replace the Panel Board with a new one. | |
|
|
|
| ||
2. | Check if the Panel Board is damaged. | 2. | Replace the Panel Board with a new one. | ||
| |||||
|
|
|
|
| |
| 1. | Check if the PS Board Cable is connected correctly to J3 | 1. | Connect the PS Board Cable to J3 on the Main | |
|
| on the Main Board. |
| Board. |
J3
PS Board Unit |
| PS Board Cable |
|
|
|
|
|
| |
|
|
|
|
|
| 2. Check if the PS Board Cable/PS Board is damaged. | 2. Replace the PS Board Unit with a new one. | ||
|
|
|
| * If the problem is not solved, replace the Main |
|
|
|
| Board with a new one. |
PS Board
PS Board Cable
TROUBLESHOOTING | Error Indications and Fault Occurrence Causes | 44 |