Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300 | Revision A |
4.6.3 Scanner Motor Unit
Parts/Components need to be removed in advance: Document Cover/ASF Cover (p59), Scanner Unit (p62) Upper Scanner Housing (p96)
Removal procedure
1.Move the Scanner Carriage Unit to the center. (Refer to 4.6.2 Scanner Carriage Unit Step1 (p97))
2.Loosen the Scanner Timing Belt by pressing the Driven Pulley and remove the Scanner Timing Belt from the Combination Gear and the Driven Pulley. (Refer to 4.6.2 Scanner Carriage Unit Step3 (p97))
3.Release the Scanner Motor cable from the ribs at the bottom of the Scanner Housing.
4.Remove the two screws that secure the Scanner Motor Unit, and remove the Scanner Motor Unit.
When installing the Scanner Motor Unit, align each dowel at the bottom of the Scanner Housing with their positioning holes of the Scanner Motor Unit. (See
Route the Scanner Motor cable through the three ribs and the two protrusions at the bottom of the Scanner Housing. (See
Scanner Motor cable
Scanner Motor Unit
Protrusion
Rib
Positioning hole and dowel
SCREW
Figure 4-114. Removing the Scanner Motor Unit
DISASSEMBLY/ASSEMBLY | Disassembling the Scanner Unit | 99 |