Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300 | Revision A |
3.Release the two hooks of the IS Cap Assy by rotating it to the direction of arrow pulling out the central rib of the assy., and remove the IS Cap Assy from the Case Cleaner.
Case Cleaner
Back | Hook |
|
IS Cap Assy
Rib |
Figure 4-58. Disassembling the Cap Assy (2)
4.Remove the Cleaner Cap Spring from the dowels of the IS Cap Assy.
Cleaner Cap Spring
IS Cap Assy | Dowel |
|
Figure 4-59. Disassembling the Cap Assy (3)
When installing the Foam Cap Side, align the notchs of the Foam Cap Side with the ribs of the Case Cleaner, and insert them without any gap. (See Fig.4-60.)
When installing the IS Cap Assy, install the Cleaner Cap Spring to the dowels of the Case Cleaner.
Case Cleaner
Ribs of Foam Cap Side
Dowel |
Figure 4-60. Assembling the Cap Assy (1)
When installing the Blade Wiper and the Felt Wiper, align the dowels of the Blade Wiper with the positioning holes of the Felt Wiper.
|
| Dowel |
Blade Wiper | Felt Wiper | Positioning Hole |
|
Figure 4-61. Assembling the Cap Assy (2)
DISASSEMBLY/ASSEMBLY | Disassembling the Printer Mechanism | 80 |