Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300 | Revision A |
8.Release the hook of the Combination Gear, and remove the gear from the ASF Housing.
9.Remove the Lever Pick Clutch from the ASF Housing.
When installing the ASF Unit, insert the guide pin of the Lower Housing to the positioning hole of the unit, and secure the unit with the hook of it and the three screws. (See
When installing the LD Roller Assy and the ASF Unit, make sure to engage the cam face of the LD Roller Assy and that of the Paper Back Lever.
Cam Face of the LD Roller Assy
Hook |
ASF Housing | Lever Pick Clutch |
|
Figure 4-93. Removing the Lever Pick Clutch
Combination Gear
Cam Face of the Paper Back Lever
Figure 4-95. Installing the ASF Unit
When installing the LD Roller to the LD Roller Assy, make sure to attach it with the arrow inside as shown below.
10.Disengage the Lever Clutch Spring from the ribs of the Change Lever, and remove the Lever Clutch Spring.
11.Remove the Lever Idle Gear from the Change Lever.
Ribs | Rear |
Change Lever |
Lever Idle Gear |
| Lever Clutch Spring |
Figure 4-94. Removing the Change Lever
LD Roller Assy
LD Roller
Paper eject side
Paper feed side
Figure 4-96. Assembling the LD Roller Assy (1)
DISASSEMBLY/ASSEMBLY | Disassembling the Printer Mechanism | 92 |