Epson TX103, TX105, SX100, TX100, NX105, ME 300, SX105, TX101, TX106, TX109, TX102 Replacing the Spacers

Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300 Revision A

6.Disengage the shafts on both ends of the CIS Unit from the bearing holes of the Scanner CR Holder, and remove the unit.

CIS Unit

Scanner CR Holder

Shaft and Shaft hole

Figure 4-111. Removing the CIS Unit

„Install the CIS springs (x2) to the dowels of the Scanner CR Holder. (See Fig.4-112.)

Dowel

Scanner CR Holder

CIS Spring

Figure 4-112. Installing the CiS Spring

„When installing the spacers, be sure to place them with the cutout facing inward. (See Fig.4-113.)

Spacer

Figure 4-113. Replacing the Spacers

DISASSEMBLY/ASSEMBLY Disassembling the Scanner Unit 98

Confidential