Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300 | Revision A |
4.Release the two hooks on both sides of the Carriage with a flathead precision screwdriver or a similar tool, and remove the Holder Contact Assy upward as shown below.
5.Release the hook, and remove the FFC Cover.
hook |
Figure 4-30. Removing the Printhead (5)
FFC Cover |
Rib |
Hook |
Holder Contact Assy | Holder Contact Assy |
|
Figure 4-29. Removing the Printhead (4)
CAUTION | Be careful not to touch the nozzles with bare hands or damage the | |
|
| ink supply needles of the Printhead. |
|
|
|
6.Remove the three screws that secure the Printhead, and lift the Printhead with longnose pliers.
Printhead |
Head FFC | SCREW |
Figure 4-31. Removing the Printhead (6)
DISASSEMBLY/ASSEMBLY | Disassembling the Printer Mechanism | 69 |