Kodak 9150DC, 9125DC, 9090DB, 9090DC manual Installation, Contents Installing the exit deflector

Page 13

2 Installation

Contents

Installing the exit deflector

Installing the exit deflector	2-1
Installation: with a USB connection	2-2
Installation: with an optional SCSI connection	2-3

This section provides detailed information supporting the Installation Guide that is provided with your scanner. Follow these steps in the order they are provided to install your scanner.

NOTES:

•If you have already performed all of the steps in the Installation Guide, skip this section.

•When positioning the scanner, be sure to provide adequate clearance at the back of the scanner if you will be using the rear document exit. For more information on the rear document exit, see Appendix C, Installing and Using the Straight Pass-Through Adapter.

•The scanner weighs approximately 112 pounds (50.8 kg). Be sure to incorporate the appropriate manpower before moving or lifting the scanner.

•Verify that your host PC meets the system requirements as specified in Appendix A, Specifications.

•The scanner is packed with a set of language-specific Control Panel overlays. The English overlay is installed on the scanner. If you prefer a different language, take the desired overlay and adhere it to the control panel.

The scanner is packed with two exit deflectors. The exit deflector aids in better document stacking. The standard exit deflector should be used for most of your scanning needs. The lightweight exit deflector should be used when scanning light-weight documents.

•Install the exit deflector by clipping it to the rail at the top of the scanner.

A-61662 October 2011

2-1

Image 13

Contents Page User Precautions SafetyEuropean Union Acoustic emission Environmental informationEMC statements United States JapanEuropean Union Peoples Republic of China KoreaPage Overview ContentsWhat’s in the box Front view Scanner componentsStandard Exit Deflector Lightweight Exit Deflector Page Page Rear view Contents Installing the exit deflector InstallationInstallation with a USB connection Installation with an optional Scsi connection Page Getting Started Maximum thickness Getting your documents ready to scanManually feeding documents Select the Accelerated Scanning tab Accelerated scanning VRS onlyControl Panel and Ngenuity Operator Utility Control panel Status Door, Maintenance and Manual FeedSlow blinking Maintenance LED Scanner state Off not litFast blinking Steady onFeeder table Clean Print HeadDown/Set Custom functionsFor more information, see , Advanced Features Batch Control Ngenuity Batch Counter Ngenuity Operator Utility Ngenuity Operator Utility main screen Scanner menu Menu barFeature Access Help menu ScannerDetails, Feature AccessUnlock and the HelpHome screen Page Resetting the maintenance reminders Settings buttonVolume can be set to Mute, Low, Medium or High Advanced settings Page Reminder Range Default Maintenance buttonAdvanced Properties dialog box Advanced FeaturesAccessing Advanced features Advanced Properties dialog box Color screen Page Rotation screen Preferences Black & White SettingsPage Document Conflicting Controls ResolutionCamera Modes Multifeed screen Page About screen Maintenance Maintenance Recommended Range Symptoms Cleaning suppliesGlass Camera Covers / Imaging Guides SensorsPage Cleaning the pick and drive rollers Cleaning the separation roller Page Cleaning the imaging guides and camera glass covers Imaging guide removed Camera cover Lamp Cleaning the sensors Exit sensor Test Batch Cleaning the transportReplacing tires Replacement proceduresSeparation pad Replacing the preReplacing the imaging GuidesCamera calibration Page Supplies and consumables Accessories CAT NoClearing a document jam TroubleshootingSymptom Cause Remedy Installation/Setup/Connectivity Problem solvingImage and Feeding Error Message Possible Cause Possible RemedyContacting Service Appendix a Specifications Minimum RecommendedOperating system Installing the front page imprinter and ink cartridge Appendix B Installing and Using the ImprinterSpecifications Installing the front page imprinter and ink cartridgeCenter position Removing the front imprinter Installing the back page imprinter and ink cartridge Removing the back imprinter Ink cartridge specifications MaintenanceSubject Specification Print head Cleaning the ink cartridgeSpit pad replacement CleaningAdditional print head Print positions Carriage tab Click Text Controls Counter Date & Time Example Format Code Special Content Code Example Page Increment on Patch Code and Reset on Patch Code options are Reset on Patch CodePatch Code options Increment on Patch CodeContents Page Appendix D Glossary Appendix E Patch Code Information KEY Numeric code Graphical Pattern Comment Key for Graphical Pattern DescriptionPatch Patch codesPatch