Kodak 9125DC, 9150DC, 9090DB, 9090DC manual Conflicting Controls Resolution, Document

Page 48

Following is a table that identifies those other controls as well as how the scanner and software handle the conflict when you attempt to use them together.

Conflicting Controls

Resolution

 

 

Single Page Scan

The scan is terminated and an error message is displayed. Very

 

Long Document is not supported with single-page scanning. Use

 

the batch scan command.

 

 

VRS Administration Utility -

The document is scanned ignoring the warning conditions that are

Warning tab

set. No error message is displayed.

 

 

On Errors QC Mode

The document is scanned ignoring the On Errors QC Mode options

 

that are set. No error message is displayed.

 

 

Every Page QC Mode

The scan is terminated and an error message is displayed.

 

 

First Page QC Mode

The scan is terminated and an error message is displayed.

 

 

Deskew and Auto Crop

The document is scanned ignoring the Deskew and Auto Crop

 

options that are set. No error message is displayed.

 

 

Image Rotation of 90, 180, or

Do not select rotation options if scanning using Very Long

270 degrees

Document.

 

 

Auto Orientation

The scan is terminated and an error message is displayed.

 

 

Picking Rectangle

For best results, do not use Very Long Document and Picking

 

Rectangle at the same time.

 

 

Automatic Color Detection

For best results, do not use Very Long Document and Automatic

 

Color Detection at the same time.

 

 

Advanced Clarity

For best results, do not use Very Long Document and Advanced

 

Clarity at the same time.

 

 

Ignore Holes/Ragged Edges — click Enable to adjust the entry and exit sensors so they ignore holes on the leading or trailing edge of a document (e.g., three-hole punched paper), that may cause the scanner to detect false starting or trailing edges of a document. If you are receiving Page Sensor or Peripheral Malfunction errors, enable this feature and adjust the value until the error disappears.

This option can be set using a measurement in inches or millimeters with a range of 0.0 to 1.7 inches (0 to 43 mm). Set Ignore Holes/ Ragged Edges to a width slightly larger than the holes in the paper (or whatever may be causing the false detection of the leading or trailing edges of a document).

NOTE: Enabling Ignore Holes/Ragged Edges may reduce scanning throughput.

Front/Back Negative Image Enable — allows you to reverse black with white when scanning in black and white or to invert grayscale levels when scanning in grayscale. This control is not supported when scanning in color.

Dark Background Crop — in addition to auto-crop and deskew, this option could be considered as an alternative for dark documents. The default setting should satisfy most of these exception cases.

A-61662 October 2011

5-9

Page 47 Page 49
Image 48
Page 47 Page 49
Contents Page Safety User PrecautionsEnvironmental information European Union Acoustic emissionEMC statements United States JapanPeoples Republic of China Korea European UnionPage Contents OverviewWhat’s in the box Scanner components Front viewStandard Exit Deflector Lightweight Exit Deflector Page Page Rear view Installation Contents Installing the exit deflectorInstallation with a USB connection Installation with an optional Scsi connection Page Getting Started Getting your documents ready to scan Maximum thicknessManually feeding documents Accelerated scanning VRS only Select the Accelerated Scanning tabControl Panel and Ngenuity Operator Utility Control panel Door, Maintenance and Manual Feed StatusMaintenance LED Scanner state Off not lit Slow blinkingFast blinking Steady onClean Print Head Feeder tableDown/Set Custom functionsFor more information, see , Advanced Features Batch Control Ngenuity Batch Counter Ngenuity Operator Utility Ngenuity Operator Utility main screen Menu bar Scanner menuFeature Access ScannerDetails, Feature AccessUnlock and the Help Help menuHome screen Page Settings button Resetting the maintenance remindersVolume can be set to Mute, Low, Medium or High Advanced settings Page Maintenance button Reminder Range DefaultAdvanced Features Advanced Properties dialog boxAccessing Advanced features Advanced Properties dialog box Color screen Page Rotation screen Black & White Settings PreferencesPage Conflicting Controls Resolution DocumentCamera Modes Multifeed screen Page About screen Maintenance Cleaning supplies Maintenance Recommended Range SymptomsGlass Camera Covers / Imaging Guides SensorsPage Cleaning the pick and drive rollers Cleaning the separation roller Page Cleaning the imaging guides and camera glass covers Imaging guide removed Camera cover Lamp Cleaning the sensors Exit sensor Cleaning the transport Test BatchReplacement procedures Replacing tiresReplacing the pre Separation padReplacing the imaging GuidesCamera calibration Page Accessories CAT No Supplies and consumablesTroubleshooting Clearing a document jamProblem solving Symptom Cause Remedy Installation/Setup/ConnectivityError Message Possible Cause Possible Remedy Image and FeedingContacting Service Appendix a Specifications Recommended MinimumOperating system Appendix B Installing and Using the Imprinter Installing the front page imprinter and ink cartridgeInstalling the front page imprinter and ink cartridge SpecificationsCenter position Removing the front imprinter Installing the back page imprinter and ink cartridge Removing the back imprinter Maintenance Ink cartridge specificationsSubject Specification Cleaning the ink cartridge Print headCleaning Spit pad replacementAdditional print head Print positions Carriage tab Click Text Controls Counter Date & Time Example Format Code Special Content Code Example Page Reset on Patch Code Increment on Patch Code and Reset on Patch Code options arePatch Code options Increment on Patch CodeContents Page Appendix D Glossary Appendix E Patch Code Information KEY Key for Graphical Pattern Description Numeric code Graphical Pattern CommentPatch codes PatchPatch
Top Page Image Contents