Kodak 9090DB, 9125DC, 9150DC manual Patch Code options, Increment on Patch Code, Reset on Patch Code

Patch Code options	Imprint Patch Code Sheets — enable this option if you want to print
	on patch code sheets and count them with the index counter. This
	setting only applies to patch types 1, 2, 3, 5, and 6. Patch types 4, 7, 8
	and 9 will not get printed or counted even with this checkbox selected.
	The Increment on Patch Code and Reset on Patch Code options are
	only for the Kodak Ngenuity 9150 Scanner. Set these options if you
	want to use patch sheets within a batch to control printer index values.
	A set of patch codes can be found on the Installation CD or on the
	website at www.kodak.com/go/scanners; under Support>User
	Manuals.
	Increment on Patch Code
	Enable — select this checkbox to increment the index count value
	when the specified patch code is detected instead of incrementing the
	index count on each page.
	Patch Code: select the Patch Code Type that will increment the index
	counter when Increment on Patch is enabled.
	Reset on Patch Code
	Enable — select this checkbox to reset the index count value to the
	Reset Count value when the specified patch code is detected.
	Reset Count: the index count value that takes effect when the Reset
	Patch Code is detected when Reset on Patch is enabled.
	Patch Code: select the Patch Code Type that will reset the index
	counter when Reset on Patch Code is enabled.
	Changes to the index count value due to Increment on Patch and Reset
	on Patch will take effect regardless of whether Imprint Patch Code
	Sheets is selected. For more information and samples of Patch Codes,
	see Appendix E, Patch Code Information.

B-16 A-61662 October 2011