Kodak 9090DB, 9125DC, 9150DC, 9090DC manual Preferences, Black & White Settings

Page 46

Toggle Color Mode screen The Toggle Color Mode screen provides the following features.

Preferences

•Use patch code detection to toggle color mode — check this box to enable toggle patch detection.

•Start in Black and White — when checked, the batch will automatically start in Black and White mode, otherwise the batch will start in either color or grayscale as determined by the basic batch setup scan mode.

•Delete images from toggle patch sheets — when checked, images for the toggle patch sheets will be automatically deleted by VRS.

•Enable patch confirmation tone — when checked, a confirmation tone will signal that a patch has been recognized. If grayed out, this feature is not currently supported by the scanner firmware.

These patch codes are recognized when toggle color mode is enabled:

Black & White Settings

•Black and White DPI — select the DPI to use when the scanner switches to Black and White mode. This can be different than the color (or grayscale) DPI selected elsewhere for the batch. For example, basic batch setup selects Color 150 dpi, but black and white images use 300 dpi. Refer to the Kofax VRS Users Guide or VRS online help for more information regarding this feature.

A-61662 October 2011

5-7

Image 46

Contents Page Safety User PrecautionsEMC statements Environmental informationEuropean Union Acoustic emission United States JapanPeoples Republic of China Korea European UnionPage Contents OverviewWhat’s in the box Scanner components Front viewStandard Exit Deflector Lightweight Exit Deflector Page Page Rear view Installation Contents Installing the exit deflectorInstallation with a USB connection Installation with an optional Scsi connection Page Getting Started Getting your documents ready to scan Maximum thicknessManually feeding documents Accelerated scanning VRS only Select the Accelerated Scanning tabControl Panel and Ngenuity Operator Utility Control panel Door, Maintenance and Manual Feed StatusFast blinking Maintenance LED Scanner state Off not litSlow blinking Steady onDown/Set Clean Print HeadFeeder table Custom functionsFor more information, see , Advanced Features Batch Control Ngenuity Batch Counter Ngenuity Operator Utility Ngenuity Operator Utility main screen Menu bar Scanner menuFeature Access ScannerDetails, Feature AccessUnlock and the Help Help menuHome screen Page Settings button Resetting the maintenance remindersVolume can be set to Mute, Low, Medium or High Advanced settings Page Maintenance button Reminder Range DefaultAdvanced Features Advanced Properties dialog boxAccessing Advanced features Advanced Properties dialog box Color screen Page Rotation screen Black & White Settings PreferencesPage Conflicting Controls Resolution DocumentCamera Modes Multifeed screen Page About screen Maintenance Glass Camera Covers / Imaging Guides Cleaning suppliesMaintenance Recommended Range Symptoms SensorsPage Cleaning the pick and drive rollers Cleaning the separation roller Page Cleaning the imaging guides and camera glass covers Imaging guide removed Camera cover Lamp Cleaning the sensors Exit sensor Cleaning the transport Test BatchReplacement procedures Replacing tiresReplacing the imaging Replacing the preSeparation pad GuidesCamera calibration Page Accessories CAT No Supplies and consumablesTroubleshooting Clearing a document jamProblem solving Symptom Cause Remedy Installation/Setup/ConnectivityError Message Possible Cause Possible Remedy Image and FeedingContacting Service Appendix a Specifications Minimum RecommendedOperating system Appendix B Installing and Using the Imprinter Installing the front page imprinter and ink cartridgeInstalling the front page imprinter and ink cartridge SpecificationsCenter position Removing the front imprinter Installing the back page imprinter and ink cartridge Removing the back imprinter Ink cartridge specifications MaintenanceSubject Specification Cleaning the ink cartridge Print headSpit pad replacement CleaningAdditional print head Print positions Carriage tab Click Text Controls Counter Date & Time Example Format Code Special Content Code Example Page Patch Code options Reset on Patch CodeIncrement on Patch Code and Reset on Patch Code options are Increment on Patch CodeContents Page Appendix D Glossary Appendix E Patch Code Information KEY Key for Graphical Pattern Description Numeric code Graphical Pattern CommentPatch Patch codesPatch