Kodak 9090DC, 9125DC, 9150DC, 9090DB manual Installing the back page imprinter and ink cartridge

Page 79

Installing the back page imprinter and ink cartridge

To ensure proper installation of the ink cartridge, install the imprinter cartridge before installing the imprinter into the scanner. Be sure the ink cartridge is properly seated.

1.Remove the imprinter and ink cartridge from the box.

2.Remove the protective tape from the ink cartridge.

3.Move the carriage to the center position.

4.Hold the ink cartridge holder with one hand and place the ink cartridge (bottom end first) into the holder and snap it into place.

Center position

5.Turn off the scanner and power down the PC.

6.Open the back page imprinter door located in the back of the scan- ner.

7.Install the imprinter with the ink cartridge holder facing the bottom of the scanner, inserting the spring-loaded locating pin into the corre- sponding hole found in the back page assembly.

8.Hand-tighten the thumb screw located on the left side of the imprinter into the corresponding hole found in the scanner’s back page assembly.

A-61662 October 2011

B-5

Image 79

Contents Page User Precautions SafetyUnited States Japan Environmental informationEuropean Union Acoustic emission EMC statementsEuropean Union Peoples Republic of China KoreaPage Overview ContentsWhat’s in the box Front view Scanner componentsStandard Exit Deflector Lightweight Exit Deflector Page Page Rear view Contents Installing the exit deflector InstallationInstallation with a USB connection Installation with an optional Scsi connection Page Getting Started Maximum thickness Getting your documents ready to scanManually feeding documents Select the Accelerated Scanning tab Accelerated scanning VRS onlyControl Panel and Ngenuity Operator Utility Control panel Status Door, Maintenance and Manual FeedSteady on Maintenance LED Scanner state Off not litSlow blinking Fast blinkingCustom functions Clean Print HeadFeeder table Down/SetFor more information, see , Advanced Features Batch Control Ngenuity Batch Counter Ngenuity Operator Utility Ngenuity Operator Utility main screen Scanner menu Menu barFeature Access Help menu ScannerDetails, Feature AccessUnlock and the HelpHome screen Page Resetting the maintenance reminders Settings buttonVolume can be set to Mute, Low, Medium or High Advanced settings Page Reminder Range Default Maintenance buttonAdvanced Properties dialog box Advanced FeaturesAccessing Advanced features Advanced Properties dialog box Color screen Page Rotation screen Preferences Black & White SettingsPage Document Conflicting Controls ResolutionCamera Modes Multifeed screen Page About screen Maintenance Sensors Cleaning suppliesMaintenance Recommended Range Symptoms Glass Camera Covers / Imaging GuidesPage Cleaning the pick and drive rollers Cleaning the separation roller Page Cleaning the imaging guides and camera glass covers Imaging guide removed Camera cover Lamp Cleaning the sensors Exit sensor Test Batch Cleaning the transportReplacing tires Replacement proceduresGuides Replacing the preSeparation pad Replacing the imagingCamera calibration Page Supplies and consumables Accessories CAT NoClearing a document jam TroubleshootingSymptom Cause Remedy Installation/Setup/Connectivity Problem solvingImage and Feeding Error Message Possible Cause Possible RemedyContacting Service Appendix a Specifications Minimum RecommendedOperating system Installing the front page imprinter and ink cartridge Appendix B Installing and Using the ImprinterSpecifications Installing the front page imprinter and ink cartridgeCenter position Removing the front imprinter Installing the back page imprinter and ink cartridge Removing the back imprinter Ink cartridge specifications MaintenanceSubject Specification Print head Cleaning the ink cartridgeSpit pad replacement CleaningAdditional print head Print positions Carriage tab Click Text Controls Counter Date & Time Example Format Code Special Content Code Example Page Increment on Patch Code Reset on Patch CodeIncrement on Patch Code and Reset on Patch Code options are Patch Code optionsContents Page Appendix D Glossary Appendix E Patch Code Information KEY Numeric code Graphical Pattern Comment Key for Graphical Pattern DescriptionPatch Patch codesPatch