Kodak 9125DC, 9150DC, 9090DB, 9090DC manual Removing the back imprinter

Page 80

Removing the back imprinter

9.Connect the imprinter cable noting the orientation of the key on the plug and the slot on the connector.

10.Close the back page imprinter door.

11.Turn on the scanner and the PC.

12.Launch the Ngenuity Operator Utility and confirm the imprinter is recognized.

NOTE: Do not leave the ink cartridge in the imprinter when not in use.

1.Turn off the scanner.

2.Open the back page imprinter door.

3.Unplug the imprinter cable.

4.Unscrew the thumb screw located on the left side of the imprinter.

5.Pull the spring-loaded locating pin away from the wall of the scan- ner releasing the pin from the scanner’s back page assembly.

Locating pin

6.Pull the imprinter out of the scanner.

7.Close the back page imprinter door.

8.Turn on the scanner.

B-6	A-61662 October 2011

Image 80

Contents Page Safety User PrecautionsEnvironmental information European Union Acoustic emissionEMC statements United States JapanPeoples Republic of China Korea European UnionPage Contents OverviewWhat’s in the box Scanner components Front viewStandard Exit Deflector Lightweight Exit Deflector Page Page Rear view Installation Contents Installing the exit deflectorInstallation with a USB connection Installation with an optional Scsi connection Page Getting Started Getting your documents ready to scan Maximum thicknessManually feeding documents Accelerated scanning VRS only Select the Accelerated Scanning tabControl Panel and Ngenuity Operator Utility Control panel Door, Maintenance and Manual Feed StatusMaintenance LED Scanner state Off not lit Slow blinkingFast blinking Steady onClean Print Head Feeder tableDown/Set Custom functionsFor more information, see , Advanced Features Batch Control Ngenuity Batch Counter Ngenuity Operator Utility Ngenuity Operator Utility main screen Menu bar Scanner menuFeature Access ScannerDetails, Feature AccessUnlock and the Help Help menuHome screen Page Settings button Resetting the maintenance remindersVolume can be set to Mute, Low, Medium or High Advanced settings Page Maintenance button Reminder Range DefaultAdvanced Features Advanced Properties dialog boxAccessing Advanced features Advanced Properties dialog box Color screen Page Rotation screen Black & White Settings PreferencesPage Conflicting Controls Resolution DocumentCamera Modes Multifeed screen Page About screen Maintenance Cleaning supplies Maintenance Recommended Range SymptomsGlass Camera Covers / Imaging Guides SensorsPage Cleaning the pick and drive rollers Cleaning the separation roller Page Cleaning the imaging guides and camera glass covers Imaging guide removed Camera cover Lamp Cleaning the sensors Exit sensor Cleaning the transport Test BatchReplacement procedures Replacing tiresReplacing the pre Separation padReplacing the imaging GuidesCamera calibration Page Accessories CAT No Supplies and consumablesTroubleshooting Clearing a document jamProblem solving Symptom Cause Remedy Installation/Setup/ConnectivityError Message Possible Cause Possible Remedy Image and FeedingContacting Service Appendix a Specifications Operating system RecommendedMinimum Appendix B Installing and Using the Imprinter Installing the front page imprinter and ink cartridgeInstalling the front page imprinter and ink cartridge SpecificationsCenter position Removing the front imprinter Installing the back page imprinter and ink cartridge Removing the back imprinter Subject Specification MaintenanceInk cartridge specifications Cleaning the ink cartridge Print headAdditional print head CleaningSpit pad replacement Print positions Carriage tab Click Text Controls Counter Date & Time Example Format Code Special Content Code Example Page Reset on Patch Code Increment on Patch Code and Reset on Patch Code options arePatch Code options Increment on Patch CodeContents Page Appendix D Glossary Appendix E Patch Code Information KEY Key for Graphical Pattern Description Numeric code Graphical Pattern CommentPatch Patch codesPatch