Kodak 9150DC, 9125DC, 9090DB, 9090DC manual Center position

Page 77

3.Move the carriage to the center position.

4.Hold the ink cartridge holder with one hand and place the ink cartridge (bottom end first) into the holder and snap it into place.

Center position

5.Turn off the scanner and power down the PC.

6.Remove the scanner exit tray.

7.Open the front page imprinter door.

8.Insert the imprinter’s spring-loaded locating pin into the correspond- ing hole found in the scanner’s front page assembly (left side) with the ink cartridge holder.

Thumb screw

Ink cartridge

Imprinter door	Spring-loaded location pin

9.Hand-tighten the thumb screw located on the right side of the imprinter into the corresponding hole found in the scanner’s front page assembly.

A-61662 October 2011

B-3

Image 77

Contents Page User Precautions SafetyEuropean Union Acoustic emission Environmental informationEMC statements United States JapanEuropean Union Peoples Republic of China KoreaPage Overview ContentsWhat’s in the box Front view Scanner componentsStandard Exit Deflector Lightweight Exit Deflector Page Page Rear view Contents Installing the exit deflector InstallationInstallation with a USB connection Installation with an optional Scsi connection Page Getting Started Maximum thickness Getting your documents ready to scanManually feeding documents Select the Accelerated Scanning tab Accelerated scanning VRS onlyControl Panel and Ngenuity Operator Utility Control panel Status Door, Maintenance and Manual FeedSlow blinking Maintenance LED Scanner state Off not litFast blinking Steady onFeeder table Clean Print HeadDown/Set Custom functionsFor more information, see , Advanced Features Batch Control Ngenuity Batch Counter Ngenuity Operator Utility Ngenuity Operator Utility main screen Scanner menu Menu barFeature Access Help menu ScannerDetails, Feature AccessUnlock and the HelpHome screen Page Resetting the maintenance reminders Settings buttonVolume can be set to Mute, Low, Medium or High Advanced settings Page Reminder Range Default Maintenance buttonAdvanced Properties dialog box Advanced FeaturesAccessing Advanced features Advanced Properties dialog box Color screen Page Rotation screen Preferences Black & White SettingsPage Document Conflicting Controls ResolutionCamera Modes Multifeed screen Page About screen Maintenance Maintenance Recommended Range Symptoms Cleaning suppliesGlass Camera Covers / Imaging Guides SensorsPage Cleaning the pick and drive rollers Cleaning the separation roller Page Cleaning the imaging guides and camera glass covers Imaging guide removed Camera cover Lamp Cleaning the sensors Exit sensor Test Batch Cleaning the transportReplacing tires Replacement proceduresSeparation pad Replacing the preReplacing the imaging GuidesCamera calibration Page Supplies and consumables Accessories CAT NoClearing a document jam TroubleshootingSymptom Cause Remedy Installation/Setup/Connectivity Problem solvingImage and Feeding Error Message Possible Cause Possible RemedyContacting Service Appendix a Specifications Operating system RecommendedMinimum Installing the front page imprinter and ink cartridge Appendix B Installing and Using the ImprinterSpecifications Installing the front page imprinter and ink cartridgeCenter position Removing the front imprinter Installing the back page imprinter and ink cartridge Removing the back imprinter Subject Specification MaintenanceInk cartridge specifications Print head Cleaning the ink cartridgeAdditional print head CleaningSpit pad replacement Print positions Carriage tab Click Text Controls Counter Date & Time Example Format Code Special Content Code Example Page Increment on Patch Code and Reset on Patch Code options are Reset on Patch CodePatch Code options Increment on Patch CodeContents Page Appendix D Glossary Appendix E Patch Code Information KEY Numeric code Graphical Pattern Comment Key for Graphical Pattern DescriptionPatch Patch codesPatch