Kodak 9090DB, 9125DC, 9150DC, 9090DC manual Installation with a USB connection

Page 14

Installation: with a USB connection

If you are using the optional SCSI connection, refer to the next section for installation instructions.

1.Without the scanner attached, turn on the host PC.

2.Load the Installation CD into the CD-ROM drive and install the software in the following order: Ngenuity VRS software first, then the Ngenuity Operator Utility (NOU). You do not need to reboot the host PC after installing each software application.

NOTE: For the latest drivers, go to www.Kodak.com/go/scanners.

3.Power down the host PC.

4.Attach the host PC to the scanner using the supplied USB cable.

5.Turn on the scanner. After the initialization sequence has finished, turn on the host PC.

NOTE: If you are prompted to check for VRS updates, select No.

6.Complete the “Found New Hardware” wizard (twice) to install the USB drivers.

7.Launch the Ngenuity Operator Utility (NOU) by double-clicking the

NOU icon found on the desktop of the host PC.

8.Confirm the Ngenuity Operator Utility is communicating with the scanner and all the self tests have passed.

The installation is complete. You are now ready to scan. Refer to the instructions for your scanning application or document management software.

2-2	A-61662 October 2011

Image 14

Contents Page Safety User PrecautionsEMC statements Environmental informationEuropean Union Acoustic emission United States JapanPeoples Republic of China Korea European UnionPage Contents OverviewWhat’s in the box Scanner components Front viewStandard Exit Deflector Lightweight Exit Deflector Page Page Rear view Installation Contents Installing the exit deflectorInstallation with a USB connection Installation with an optional Scsi connection Page Getting Started Getting your documents ready to scan Maximum thicknessManually feeding documents Accelerated scanning VRS only Select the Accelerated Scanning tabControl Panel and Ngenuity Operator Utility Control panel Door, Maintenance and Manual Feed StatusFast blinking Maintenance LED Scanner state Off not litSlow blinking Steady onDown/Set Clean Print HeadFeeder table Custom functionsFor more information, see , Advanced Features Batch Control Ngenuity Batch Counter Ngenuity Operator Utility Ngenuity Operator Utility main screen Menu bar Scanner menuFeature Access ScannerDetails, Feature AccessUnlock and the Help Help menuHome screen Page Settings button Resetting the maintenance remindersVolume can be set to Mute, Low, Medium or High Advanced settings Page Maintenance button Reminder Range DefaultAdvanced Features Advanced Properties dialog boxAccessing Advanced features Advanced Properties dialog box Color screen Page Rotation screen Black & White Settings PreferencesPage Conflicting Controls Resolution DocumentCamera Modes Multifeed screen Page About screen Maintenance Glass Camera Covers / Imaging Guides Cleaning suppliesMaintenance Recommended Range Symptoms SensorsPage Cleaning the pick and drive rollers Cleaning the separation roller Page Cleaning the imaging guides and camera glass covers Imaging guide removed Camera cover Lamp Cleaning the sensors Exit sensor Cleaning the transport Test BatchReplacement procedures Replacing tiresReplacing the imaging Replacing the preSeparation pad GuidesCamera calibration Page Accessories CAT No Supplies and consumablesTroubleshooting Clearing a document jamProblem solving Symptom Cause Remedy Installation/Setup/ConnectivityError Message Possible Cause Possible Remedy Image and FeedingContacting Service Appendix a Specifications Operating system RecommendedMinimum Appendix B Installing and Using the Imprinter Installing the front page imprinter and ink cartridgeInstalling the front page imprinter and ink cartridge SpecificationsCenter position Removing the front imprinter Installing the back page imprinter and ink cartridge Removing the back imprinter Subject Specification MaintenanceInk cartridge specifications Cleaning the ink cartridge Print headAdditional print head CleaningSpit pad replacement Print positions Carriage tab Click Text Controls Counter Date & Time Example Format Code Special Content Code Example Page Patch Code options Reset on Patch CodeIncrement on Patch Code and Reset on Patch Code options are Increment on Patch CodeContents Page Appendix D Glossary Appendix E Patch Code Information KEY Key for Graphical Pattern Description Numeric code Graphical Pattern CommentPatch Patch codesPatch