Kodak 9125DC, 9150DC, 9090DB, 9090DC manual Replacement procedures, Replacing tires

Page 64

Replacement procedures

Replacing tires

This section provides procedures for replacing the following parts: the feed rollers, the pre-separation pad and the imaging guides. When replacing parts, turn the scanner off by pressing the power switch located in the back of the scanner and unplug the power cord from the wall outlet.

With proper cleaning, tire life of the pick roller, drive roller and separation roller is approximately 600,000 pages. Different document types, the condition of the documents being scanned, and the volume of scanning may alter that estimation.

All tires on the pick roller, drive roller and separation roller should be replaced at the same time. See the section entitled, “Cleaning the feed rollers” earlier in this chapter for procedures on removing and installing the feed rollers.

1.Open the scanner cover.

2.Remove the pick and drive rollers.

3.Gently remove each tire from the pick and drive rollers and dispose the old tires.

4.Install each new tire by gently pulling it over the core. The tires do not need to be installed in any specific orientation.

IMPORTANT:Do not overstretch the tire; it may tear.

5.Re-install the pick and drive rollers.

6.Pull the separation roller door forward and hold it in place while you remove the separation roller; gently release the separation roller door back in place.

7.Remove each tire from the separation roller and dispose the old tires.

8.Re-install the separation roller and verify that the separator roller is seated properly.

9.Close the scanner cover.

10.When all tires have been replaced, reset the maintenance reminder by clicking on the Replace Feed Rollers link on the Maintenance monitor.

11.Click Yes on the dialog box to confirm the tires/rollers have been replaced. The reminder will be reset for the next required maintenance session.

6-12	A-61662 October 2011

Image 64

Contents Page Safety User PrecautionsEnvironmental information European Union Acoustic emissionEMC statements United States JapanPeoples Republic of China Korea European UnionPage Contents OverviewWhat’s in the box Scanner components Front viewStandard Exit Deflector Lightweight Exit Deflector Page Page Rear view Installation Contents Installing the exit deflectorInstallation with a USB connection Installation with an optional Scsi connection Page Getting Started Getting your documents ready to scan Maximum thicknessManually feeding documents Accelerated scanning VRS only Select the Accelerated Scanning tabControl Panel and Ngenuity Operator Utility Control panel Door, Maintenance and Manual Feed StatusMaintenance LED Scanner state Off not lit Slow blinkingFast blinking Steady onClean Print Head Feeder tableDown/Set Custom functionsFor more information, see , Advanced Features Batch Control Ngenuity Batch Counter Ngenuity Operator Utility Ngenuity Operator Utility main screen Menu bar Scanner menuFeature Access ScannerDetails, Feature AccessUnlock and the Help Help menuHome screen Page Settings button Resetting the maintenance remindersVolume can be set to Mute, Low, Medium or High Advanced settings Page Maintenance button Reminder Range DefaultAdvanced Features Advanced Properties dialog boxAccessing Advanced features Advanced Properties dialog box Color screen Page Rotation screen Black & White Settings PreferencesPage Conflicting Controls Resolution DocumentCamera Modes Multifeed screen Page About screen Maintenance Cleaning supplies Maintenance Recommended Range SymptomsGlass Camera Covers / Imaging Guides SensorsPage Cleaning the pick and drive rollers Cleaning the separation roller Page Cleaning the imaging guides and camera glass covers Imaging guide removed Camera cover Lamp Cleaning the sensors Exit sensor Cleaning the transport Test BatchReplacement procedures Replacing tiresReplacing the pre Separation padReplacing the imaging GuidesCamera calibration Page Accessories CAT No Supplies and consumablesTroubleshooting Clearing a document jamProblem solving Symptom Cause Remedy Installation/Setup/ConnectivityError Message Possible Cause Possible Remedy Image and FeedingContacting Service Appendix a Specifications Minimum RecommendedOperating system Appendix B Installing and Using the Imprinter Installing the front page imprinter and ink cartridgeInstalling the front page imprinter and ink cartridge SpecificationsCenter position Removing the front imprinter Installing the back page imprinter and ink cartridge Removing the back imprinter Ink cartridge specifications MaintenanceSubject Specification Cleaning the ink cartridge Print headSpit pad replacement CleaningAdditional print head Print positions Carriage tab Click Text Controls Counter Date & Time Example Format Code Special Content Code Example Page Reset on Patch Code Increment on Patch Code and Reset on Patch Code options arePatch Code options Increment on Patch CodeContents Page Appendix D Glossary Appendix E Patch Code Information KEY Key for Graphical Pattern Description Numeric code Graphical Pattern CommentPatch Patch codesPatch