Kodak 9090DC, 9125DC, 9150DC, 9090DB manual Additional print head, Cleaning, Spit pad replacement

Page 83

Additional print head	If cleaning the print head using the F1 key does not provide the desired
cleaning	results, you can further clean the printer by following the steps below.
	1.	Turn off the scanner.
	2.	Remove the front (or back) imprinter unit from the scanner. See the
		sections entitled, “Removing the front imprinter” or “Removing the
		back imprinter” earlier in this chapter for instructions.
	3.	Remove the ink cartridge by grasping the ink cartridge holder and
		pulling the tab on the ink cartridge out from the ink cartridge holder.

4.Dampen a clean, lint-free cloth with water.

5.Hold the cloth in contact with the nozzles on the ink cartridge for a few seconds, then gently wipe the nozzle plate. Do not wipe the electrical contact area.

6.If ink remains on the nozzle plate, wipe again with a dry, lint-free cloth.

CAUTION: Do not use a roller cleaning pad to clean the print head. Do not use any material that contains alcohol when cleaning the print head.

Spit pad replacement	The back page imprinter assembly contains a spit pad that is used to
	absorb any excess ink from the front page imprinter during printing. The
	spit pad is located underneath the back page assembly’s entry tray.
	Over time the spit pad will become saturated and will need to be
	replaced. The life expectancy of the spit pad is expected to last as long
	or longer than the transport rollers. Contact Technical Support for spit
	pad replacement.

A-61662 October 2011

B-9

Image 83

Contents Page User Precautions SafetyUnited States Japan Environmental informationEuropean Union Acoustic emission EMC statementsEuropean Union Peoples Republic of China KoreaPage Overview ContentsWhat’s in the box Front view Scanner componentsStandard Exit Deflector Lightweight Exit Deflector Page Page Rear view Contents Installing the exit deflector InstallationInstallation with a USB connection Installation with an optional Scsi connection Page Getting Started Maximum thickness Getting your documents ready to scanManually feeding documents Select the Accelerated Scanning tab Accelerated scanning VRS onlyControl Panel and Ngenuity Operator Utility Control panel Status Door, Maintenance and Manual FeedSteady on Maintenance LED Scanner state Off not litSlow blinking Fast blinkingCustom functions Clean Print HeadFeeder table Down/SetFor more information, see , Advanced Features Batch Control Ngenuity Batch Counter Ngenuity Operator Utility Ngenuity Operator Utility main screen Scanner menu Menu barFeature Access Help menu ScannerDetails, Feature AccessUnlock and the HelpHome screen Page Resetting the maintenance reminders Settings buttonVolume can be set to Mute, Low, Medium or High Advanced settings Page Reminder Range Default Maintenance buttonAdvanced Properties dialog box Advanced FeaturesAccessing Advanced features Advanced Properties dialog box Color screen Page Rotation screen Preferences Black & White SettingsPage Document Conflicting Controls ResolutionCamera Modes Multifeed screen Page About screen Maintenance Sensors Cleaning suppliesMaintenance Recommended Range Symptoms Glass Camera Covers / Imaging GuidesPage Cleaning the pick and drive rollers Cleaning the separation roller Page Cleaning the imaging guides and camera glass covers Imaging guide removed Camera cover Lamp Cleaning the sensors Exit sensor Test Batch Cleaning the transportReplacing tires Replacement proceduresGuides Replacing the preSeparation pad Replacing the imagingCamera calibration Page Supplies and consumables Accessories CAT NoClearing a document jam TroubleshootingSymptom Cause Remedy Installation/Setup/Connectivity Problem solvingImage and Feeding Error Message Possible Cause Possible RemedyContacting Service Appendix a Specifications Operating system RecommendedMinimum Installing the front page imprinter and ink cartridge Appendix B Installing and Using the ImprinterSpecifications Installing the front page imprinter and ink cartridgeCenter position Removing the front imprinter Installing the back page imprinter and ink cartridge Removing the back imprinter Subject Specification MaintenanceInk cartridge specifications Print head Cleaning the ink cartridgeAdditional print head CleaningSpit pad replacement Print positions Carriage tab Click Text Controls Counter Date & Time Example Format Code Special Content Code Example Page Increment on Patch Code Reset on Patch CodeIncrement on Patch Code and Reset on Patch Code options are Patch Code optionsContents Page Appendix D Glossary Appendix E Patch Code Information KEY Numeric code Graphical Pattern Comment Key for Graphical Pattern DescriptionPatch Patch codesPatch