Kodak 9090DB, 9125DC, 9150DC, 9090DC manual Appendix E Patch Code Information

Page 94

Appendix E Patch Code Information

This appendix provides additional information for patch codes supported by Kodak Ngenuity 9000 Series Scanners.

Kodak Ngenuity Scanners include two hardware-based Patch Readers. The Patch Reader recognizes patches with bars that are parallel to the lead edge of the document. All Kodak Ngenuity Scanners support patch reading for color toggle patch processing. Only the Kodak Ngenuity 9150 Scanner supports Printer Counter Increment and Resetting through Patch. The Kodak Ngenuity 9150 Scanner does not support full image addressing or batching.

The following additional patches for the Kodak Ngenuity Series Scanners have the same element specifications as the Patch Codes described in Kodak publication, A-61599, “Patch Code Information for Kodak Scanners”.

The wide bars should be 0.20 inches (5 mm) wide plus 0.01 inches (0.25 mm). The narrow bars and spaces should be 0.08 inches (2.03

mm)wide plus 0.01 inches (0.25 mm). The maximum width of the patch code is 0.80 inches (20 mm) plus 0.01 inches (0.25 mm). The minimum overall length of the patch bars is 2 inches (50 mm).

For vertical placement, the patch cannot start before 0.25 inches from the leading edge of the page and the bottom of the patch pattern must finish before 3.75 inches from the leading edge.

The only exception to this is when Increment on Patch or Reset on Patch is checked; the patches must occur in the region from 0.25 inches to 1.70 inches from the leading edge.

NOTE:Only patches on the top side of the document will be read.

A-61662 October 2011

E-1

Image 94

Contents Page Safety User PrecautionsEMC statements Environmental informationEuropean Union Acoustic emission United States JapanPeoples Republic of China Korea European UnionPage Contents OverviewWhat’s in the box Scanner components Front viewStandard Exit Deflector Lightweight Exit Deflector Page Page Rear view Installation Contents Installing the exit deflectorInstallation with a USB connection Installation with an optional Scsi connection Page Getting Started Getting your documents ready to scan Maximum thicknessManually feeding documents Accelerated scanning VRS only Select the Accelerated Scanning tabControl Panel and Ngenuity Operator Utility Control panel Door, Maintenance and Manual Feed StatusFast blinking Maintenance LED Scanner state Off not litSlow blinking Steady onDown/Set Clean Print HeadFeeder table Custom functionsFor more information, see , Advanced Features Batch Control Ngenuity Batch Counter Ngenuity Operator Utility Ngenuity Operator Utility main screen Menu bar Scanner menuFeature Access ScannerDetails, Feature AccessUnlock and the Help Help menuHome screen Page Settings button Resetting the maintenance remindersVolume can be set to Mute, Low, Medium or High Advanced settings Page Maintenance button Reminder Range DefaultAdvanced Features Advanced Properties dialog boxAccessing Advanced features Advanced Properties dialog box Color screen Page Rotation screen Black & White Settings PreferencesPage Conflicting Controls Resolution DocumentCamera Modes Multifeed screen Page About screen Maintenance Glass Camera Covers / Imaging Guides Cleaning suppliesMaintenance Recommended Range Symptoms SensorsPage Cleaning the pick and drive rollers Cleaning the separation roller Page Cleaning the imaging guides and camera glass covers Imaging guide removed Camera cover Lamp Cleaning the sensors Exit sensor Cleaning the transport Test BatchReplacement procedures Replacing tiresReplacing the imaging Replacing the preSeparation pad GuidesCamera calibration Page Accessories CAT No Supplies and consumablesTroubleshooting Clearing a document jamProblem solving Symptom Cause Remedy Installation/Setup/ConnectivityError Message Possible Cause Possible Remedy Image and FeedingContacting Service Appendix a Specifications Minimum RecommendedOperating system Appendix B Installing and Using the Imprinter Installing the front page imprinter and ink cartridgeInstalling the front page imprinter and ink cartridge SpecificationsCenter position Removing the front imprinter Installing the back page imprinter and ink cartridge Removing the back imprinter Ink cartridge specifications MaintenanceSubject Specification Cleaning the ink cartridge Print headSpit pad replacement CleaningAdditional print head Print positions Carriage tab Click Text Controls Counter Date & Time Example Format Code Special Content Code Example Page Patch Code options Reset on Patch CodeIncrement on Patch Code and Reset on Patch Code options are Increment on Patch CodeContents Page Appendix D Glossary Appendix E Patch Code Information KEY Key for Graphical Pattern Description Numeric code Graphical Pattern CommentPatch Patch codesPatch