Kodak 9090DC, 9125DC, 9150DC, 9090DB manual Installation with an optional Scsi connection

Page 15

Installation: with an optional SCSI connection

The Kodak Ngenuity Scanner is equipped to accommodate a SCSI connection for communication between the scanner and host PC. The optional SCSI connection can be used in lieu of the standard USB connection.

To use a SCSI connection, a SCSI card and cable is required. Kodak does not provide a SCSI card or cable with the Ngenuity Scanner; therefore, these items must be purchased separately. A SCSI connection kit is not available through Kodak; however, Kodak has certified that Adaptec’s 29160 LP or regular profile card is compatible with Ngenuity Scanners. The SCSI cable must be a D68-pin SCSI-3 cable.

1.Without the scanner attached, turn on the host PC.

2.Load the Installation CD into the CD-ROM drive and install the software in the following order: Ngenuity VRS software first, then the Ngenuity Operator Utility (NOU). You do not need to reboot the host PC after installing each software application.

NOTE: For the latest drivers, go to www.Kodak.com/go/scanners.

3.Power down the host PC and remove the power cord.

4.Install the SCSI card (Adaptec 29160) in the host PC. See the instructions that are included with the SCSI card.

5.Connect the host PC to the scanner.

6.Connect the power to the scanner and reconnect power to the host PC.

7.Turn the scanner on and wait for the initialization sequence to complete.

8.Turn on the host PC.

9.Follow the prompts within the New Hardware Found wizard.

10.Launch the Ngenuity Operator Utility (NOU) by double-clicking the NOU icon found on the desktop of the host PC.

A-61662 October 2011

2-3

Image 15

Contents Page User Precautions SafetyUnited States Japan Environmental informationEuropean Union Acoustic emission EMC statementsEuropean Union Peoples Republic of China KoreaPage Overview ContentsWhat’s in the box Front view Scanner componentsStandard Exit Deflector Lightweight Exit Deflector Page Page Rear view Contents Installing the exit deflector InstallationInstallation with a USB connection Installation with an optional Scsi connection Page Getting Started Maximum thickness Getting your documents ready to scanManually feeding documents Select the Accelerated Scanning tab Accelerated scanning VRS onlyControl Panel and Ngenuity Operator Utility Control panel Status Door, Maintenance and Manual FeedSteady on Maintenance LED Scanner state Off not litSlow blinking Fast blinkingCustom functions Clean Print HeadFeeder table Down/SetFor more information, see , Advanced Features Batch Control Ngenuity Batch Counter Ngenuity Operator Utility Ngenuity Operator Utility main screen Scanner menu Menu barFeature Access Help menu ScannerDetails, Feature AccessUnlock and the HelpHome screen Page Resetting the maintenance reminders Settings buttonVolume can be set to Mute, Low, Medium or High Advanced settings Page Reminder Range Default Maintenance buttonAdvanced Properties dialog box Advanced FeaturesAccessing Advanced features Advanced Properties dialog box Color screen Page Rotation screen Preferences Black & White SettingsPage Document Conflicting Controls ResolutionCamera Modes Multifeed screen Page About screen Maintenance Sensors Cleaning suppliesMaintenance Recommended Range Symptoms Glass Camera Covers / Imaging GuidesPage Cleaning the pick and drive rollers Cleaning the separation roller Page Cleaning the imaging guides and camera glass covers Imaging guide removed Camera cover Lamp Cleaning the sensors Exit sensor Test Batch Cleaning the transportReplacing tires Replacement proceduresGuides Replacing the preSeparation pad Replacing the imagingCamera calibration Page Supplies and consumables Accessories CAT NoClearing a document jam TroubleshootingSymptom Cause Remedy Installation/Setup/Connectivity Problem solvingImage and Feeding Error Message Possible Cause Possible RemedyContacting Service Appendix a Specifications Recommended MinimumOperating system Installing the front page imprinter and ink cartridge Appendix B Installing and Using the ImprinterSpecifications Installing the front page imprinter and ink cartridgeCenter position Removing the front imprinter Installing the back page imprinter and ink cartridge Removing the back imprinter Maintenance Ink cartridge specificationsSubject Specification Print head Cleaning the ink cartridgeCleaning Spit pad replacementAdditional print head Print positions Carriage tab Click Text Controls Counter Date & Time Example Format Code Special Content Code Example Page Increment on Patch Code Reset on Patch CodeIncrement on Patch Code and Reset on Patch Code options are Patch Code optionsContents Page Appendix D Glossary Appendix E Patch Code Information KEY Numeric code Graphical Pattern Comment Key for Graphical Pattern DescriptionPatch codes PatchPatch