Kodak 9090DC, 9125DC, 9150DC, 9090DB manual Cleaning the imaging guides and camera glass covers

Page 59

Cleaning the optics	Optics include the imaging guides, camera glass covers and
	sensors. All of the optics components should be cleaned at the same
	time.
	NOTE: The lamps are not part of the optics. The lamps (LEDs) should
	not be cleaned with wipes or solvents.
	Cleaning the imaging guides and camera glass covers
	To prevent streaks in images, reduced OCR/ICR/Barcode recognition
	rates, blurred images, etc., you should clean the imaging guides every
	50,000 pages.
	The two imaging guides which are inside black, plastic frames are
	located in the top and bottom transport trays. When removing an
	imaging guide for cleaning or replacement, the entire assembly
	(imaging guide and frame) are removed and replaced as one piece.
	Clean the camera glass covers at the same time you clean the imaging
	guides.
	CAUTION: Do not remove the imaging guide from the black frame.
	1. Open the scanner cover.
	2. Gently pull the 2 fastening clips that secure the top imaging guide
	towards the front of the scanner to release and remove the imaging
	guide from the transport.
	Fastening clips (2)

3.Using a Staticide wipe, clean both sides of the imaging guide. Be careful not to touch the cleaned glass.

IMPORTANT:Staticide wipes contain isopropanol which can cause eye irritation and dry skin. Wash your hands with soap and water after performing maintenance procedures. Refer to the Material Data Safety Sheet (MSDS) for more information. The MSDS is available on the Kodak web site at www.kodak.com/go/MSDS.

A-61662 October 2011

6-7

Image 59

Contents Page User Precautions SafetyUnited States Japan Environmental informationEuropean Union Acoustic emission EMC statementsEuropean Union Peoples Republic of China KoreaPage Overview ContentsWhat’s in the box Front view Scanner componentsStandard Exit Deflector Lightweight Exit Deflector Page Page Rear view Contents Installing the exit deflector InstallationInstallation with a USB connection Installation with an optional Scsi connection Page Getting Started Maximum thickness Getting your documents ready to scanManually feeding documents Select the Accelerated Scanning tab Accelerated scanning VRS onlyControl Panel and Ngenuity Operator Utility Control panel Status Door, Maintenance and Manual FeedSteady on Maintenance LED Scanner state Off not litSlow blinking Fast blinkingCustom functions Clean Print HeadFeeder table Down/SetFor more information, see , Advanced Features Batch Control Ngenuity Batch Counter Ngenuity Operator Utility Ngenuity Operator Utility main screen Scanner menu Menu barFeature Access Help menu ScannerDetails, Feature AccessUnlock and the HelpHome screen Page Resetting the maintenance reminders Settings buttonVolume can be set to Mute, Low, Medium or High Advanced settings Page Reminder Range Default Maintenance buttonAdvanced Properties dialog box Advanced FeaturesAccessing Advanced features Advanced Properties dialog box Color screen Page Rotation screen Preferences Black & White SettingsPage Document Conflicting Controls ResolutionCamera Modes Multifeed screen Page About screen Maintenance Sensors Cleaning suppliesMaintenance Recommended Range Symptoms Glass Camera Covers / Imaging GuidesPage Cleaning the pick and drive rollers Cleaning the separation roller Page Cleaning the imaging guides and camera glass covers Imaging guide removed Camera cover Lamp Cleaning the sensors Exit sensor Test Batch Cleaning the transportReplacing tires Replacement proceduresGuides Replacing the preSeparation pad Replacing the imagingCamera calibration Page Supplies and consumables Accessories CAT NoClearing a document jam TroubleshootingSymptom Cause Remedy Installation/Setup/Connectivity Problem solvingImage and Feeding Error Message Possible Cause Possible RemedyContacting Service Appendix a Specifications Operating system RecommendedMinimum Installing the front page imprinter and ink cartridge Appendix B Installing and Using the ImprinterSpecifications Installing the front page imprinter and ink cartridgeCenter position Removing the front imprinter Installing the back page imprinter and ink cartridge Removing the back imprinter Subject Specification MaintenanceInk cartridge specifications Print head Cleaning the ink cartridgeAdditional print head CleaningSpit pad replacement Print positions Carriage tab Click Text Controls Counter Date & Time Example Format Code Special Content Code Example Page Increment on Patch Code Reset on Patch CodeIncrement on Patch Code and Reset on Patch Code options are Patch Code optionsContents Page Appendix D Glossary Appendix E Patch Code Information KEY Numeric code Graphical Pattern Comment Key for Graphical Pattern DescriptionPatch Patch codesPatch