Kodak 9090DB, 9125DC, 9150DC, 9090DC manual Removing the front imprinter

Page 78

Removing the front imprinter

10.Connect the imprinter cable to the connector on the imprinter unit noting the orientation of the key on the plug and the slot on the con- nector.

11.Close the imprinter door.

12.Replace the exit tray.

13.Turn on the scanner and the PC.

14.Launch the Ngenuity Operator Utility and confirm the imprinter is recognized.

NOTE: Do not leave the ink cartridge in the imprinter when not in use.

1.Turn off the scanner.

2.Remove the exit tray.

3.Open the front page imprinter door.

4.Unplug the imprinter cable.

5.Unscrew the thumb screw located on the right side of the imprinter.

6.Pull the spring-loaded locating pin on the left side of the imprinter unit away from the wall of the scanner.

7.Lift the imprinter up and out of the scanner.

8.Close the front page imprinter door, reinstall the exit tray and turn on the scanner.

B-4	A-61662 October 2011

Image 78

Contents Page Safety User PrecautionsEMC statements Environmental informationEuropean Union Acoustic emission United States JapanPeoples Republic of China Korea European UnionPage Contents OverviewWhat’s in the box Scanner components Front viewStandard Exit Deflector Lightweight Exit Deflector Page Page Rear view Installation Contents Installing the exit deflectorInstallation with a USB connection Installation with an optional Scsi connection Page Getting Started Getting your documents ready to scan Maximum thicknessManually feeding documents Accelerated scanning VRS only Select the Accelerated Scanning tabControl Panel and Ngenuity Operator Utility Control panel Door, Maintenance and Manual Feed StatusFast blinking Maintenance LED Scanner state Off not litSlow blinking Steady onDown/Set Clean Print HeadFeeder table Custom functionsFor more information, see , Advanced Features Batch Control Ngenuity Batch Counter Ngenuity Operator Utility Ngenuity Operator Utility main screen Menu bar Scanner menuFeature Access ScannerDetails, Feature AccessUnlock and the Help Help menuHome screen Page Settings button Resetting the maintenance remindersVolume can be set to Mute, Low, Medium or High Advanced settings Page Maintenance button Reminder Range DefaultAdvanced Features Advanced Properties dialog boxAccessing Advanced features Advanced Properties dialog box Color screen Page Rotation screen Black & White Settings PreferencesPage Conflicting Controls Resolution DocumentCamera Modes Multifeed screen Page About screen Maintenance Glass Camera Covers / Imaging Guides Cleaning suppliesMaintenance Recommended Range Symptoms SensorsPage Cleaning the pick and drive rollers Cleaning the separation roller Page Cleaning the imaging guides and camera glass covers Imaging guide removed Camera cover Lamp Cleaning the sensors Exit sensor Cleaning the transport Test BatchReplacement procedures Replacing tiresReplacing the imaging Replacing the preSeparation pad GuidesCamera calibration Page Accessories CAT No Supplies and consumablesTroubleshooting Clearing a document jamProblem solving Symptom Cause Remedy Installation/Setup/ConnectivityError Message Possible Cause Possible Remedy Image and FeedingContacting Service Appendix a Specifications Recommended MinimumOperating system Appendix B Installing and Using the Imprinter Installing the front page imprinter and ink cartridgeInstalling the front page imprinter and ink cartridge SpecificationsCenter position Removing the front imprinter Installing the back page imprinter and ink cartridge Removing the back imprinter Maintenance Ink cartridge specificationsSubject Specification Cleaning the ink cartridge Print headCleaning Spit pad replacementAdditional print head Print positions Carriage tab Click Text Controls Counter Date & Time Example Format Code Special Content Code Example Page Patch Code options Reset on Patch CodeIncrement on Patch Code and Reset on Patch Code options are Increment on Patch CodeContents Page Appendix D Glossary Appendix E Patch Code Information KEY Key for Graphical Pattern Description Numeric code Graphical Pattern CommentPatch codes PatchPatch