Emerson 4015 installation instructions Suggested

Installation Instructions	IM584000300
Spec. No. 584000300 (Model 4015-X003)	Issue AB, April 3, 2013

Emerson Network Power DCM IT Rack

Ground Bar (1/4-20 Captive Nuts on 5/8” Centers) (Recommended Torque: 84 in-lbs [9 Nm])

To
Site
Ground	To IT Rack
	Frame Ground
	To Sub-Rack(s)
	Grounding Stud
Suggested	To HRMG Ground
Connection
Points	(if required)
	To NPG Ground
	(if required)

Rear

Conduit Grounding Points

(Stripped Wire Type Connection) (Wire Size Capacity: see below)

(Recommended Torque: see below)

14-10 AWG (2.5-6mm2)	20 in-lbs (2 Nm)
8 AWG (10mm2)	25 in-lbs (3 Nm)
6-4 AWG (16-25mm2)	35 in-lbs (4 Nm)

Load Distribution

Sub-Rack

Front View

(covers removed)

Figure 3-9

IT Rack and Conduit Grounding Connections

Chapter 3. Making Electrical Connections Page 27

This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy

Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.