Emerson 4015 installation instructions IM584000300

Installation Instructions	IM584000300
Spec. No. 584000300 (Model 4015-X003)	Issue AB, April 3, 2013

2)Next, the language screen appears. Press the up or down arrow key to select the desired language. Press the ENT key to confirm the selection. If no key is pressed within 10 seconds, the ACU+ selects the displayed language automatically.

3)As initialization continues, the Main screen is displayed, but with zero volts. Initialization is not complete.

4)When initialization is complete, the Main screen displays voltage and current normally, and no alarms are active.

5)System information is displayed in multiple screens. Repetitively press the up or down arrow key to view other system information screens one by one.

6)From the Main screen, press ENT to go to the “Main Menu” screen.

7)From the Main Menu, select a sub-menu by repetitively pressing the up or down arrow key. The selected sub-menu will be indicated by the cursor. Press ENT to open the sub-menu.

Note: Repeatedly press the “ESC” key to return in reverse order level by level from any sub-menu until the Main screen appears.

8)Verify and set the ACU+ Controller as required for your application. Refer to the ACU+ Controller Operation Instructions (UM1M820NNB-1) for procedures. Note that you will have to program the ACU+ for any temperature probes and external inputs/outputs connected to the IB2 Interface Board, and battery capacity if different then the factory default of 8.5 Ah (8.5 Ah per internal battery tray).

Chapter 5. Initially Starting the System Page 45

This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy

Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.