Xerox 2045e appendix PS Menu, Extend A4 Width, Data Format, Append CR to LF, Resolution

Printer Features

❖Extend A4 Width

You can extend the printing area width (when printing on A4 sheet with PCL).

•On

•Off

Note

PS Menu

❖Data Format

You can select a data format.

•Binary data

•TBCP

❒Default: Off

❒When the setting is On, the width will be 8/ inches.

❖Append CR to LF

When set to On, a carriage return

will follow each line feed: CR=CR, LF=CR−LF, FF=CR−FF.

	• Off
5
	• On

Note

❒Default: Off

❖Resolution

You can set the print resolution in dots per inch.

• 300 dpi

• 600 dpi

Note

❒Default: 600 dpi

Limitation

❒This setting is not effective when operating the machine with a parallel, US B, or EtherTalk connection.

❒When operating the machine with a parallel or USB connec- tion, if binary data is sent from the printer driver, the print job is canceled.

❒When operating the machine with an Ethernet connection, the print job is canceled under the following conditions;

•The printer driver data for- mat is TBCP, and the data format selected on the dis- play panel is Binary Data.

•The printer driver data for- mat is binary, and the data format selected on the dis- play panel is TBCP.

Note

❒Default: Binary data

❖Resolution

You can set the print resolution in dots per inch.

•300 dpi

•600 dpi

Note

❒Default: 600 dpi

46