Schneider Electric 66074, 66846 user manual Installation, Basic configuration, Environment Sensor

Page 11

Network

Management Card

User Manual

2 Installation and Configuration

For the following sections, read the installation manual supplied with the card or available for download on the www.apc.com web site in the “Download area” section .

2.1Installation

2.1.1Installing the card in the UPS / STS

2.1.2Connecting the card to the IT network

2.1.3Understanding front panel signals

2.2Basic configuration

2.2.1List of default parameters

2.2.2Adjusting the network parameters

2.2.3Rebooting the card

2.2.4Restoring factory configuration

2.2.5Lost password – restoring the default passwor d

2.2.6Checking that the card is working

2.3Environment Sensor

Read the installation manual supplied with the box.

Network Management Card – User Manual

34003676EN/HA

Page 11/81

Image 11

Contents Network Management Card NMC Transverse Environment Sensor Network Management Card Appendices Tables of Alarms and Events ConfigurationConfiguration VIA Telnet Configuration VIA SSH MAINTENANCE72 Software UpgradeGlossary Network Management Card Connecting the UPS / STS to the NetworkIntroduction Network Shutdown module only available for UPS, not for STS MGE supervisor Enterprise Power ManagerProtecting the computers / servers Monitoring the UPSs over the networkPresentation of the Network Management Cards NMC How to connect UPS / networkSetting up the protection, for UPS only ConnectionSending text messages SMS Presentation of the Environment Sensor solutionDirect sending of E-mail Technical data 10/81 Environment Sensor InstallationBasic configuration Optimising the performance of your browser Supervision / Administration via a Web browserUPS status zone essential information UPS / STSUPS properties UPS zone general information on the UPSBattery status zone STS status zone essential information STS propertiesSTS zone general information on the STS Sources status zone AboutOn-line help 18/81 Normal input measurements UPS 3-Phase displayBy Pass measurements Battery measurementsSTS 3-Phase display Source 2 input measurement UPS Control23/81 UPS weekly schedule programming Important note Shutdown parametersViewing the alarms UPS Measurements LogsSTS Measurements 29/81 STS Event log UPS Event log31/81 System log 33/81 Notified events NotificationUPS Email Notification Recipient List Mail message configuration see nextSTS Email Notification Other settingsSubject Email Message SettingsUPS Email Message Settings SenderSTS Email Message Settings Email Example User Name and password by default are Mgeups ConfigurationNetwork Settings 42/81 System 44/81 UPS Notified Applications 46/81 Central Shutdown Configuration STS Notified Applications 49/81 Access control 51/81 Access is disabled and the card is accessible in SSH Time Environment CharacteristicsStatus Configuration Log Environment status 56/81 UPS Environment Settings UPS Environment SettingsHumidity STS Environment Settings4 Log Shutdown criteria managed by the Management Card Set-up of the shutdown parametersShutdown duration Specific set-up for long autonomy installation 30 mnShutdown when backup time is less than Different server and UPS shutdown sequences 63/81 4 Off/On command Configuration in local mode Configuring a set of cards with MupgradeMgeups Choice 1 Snmp agent configuration menuChoice 2 UPS / STS parameters Choice 3 Access controlChoice 5 Reset the card Choice 4 Restore default configurationPuTTY SSH Client Program Configuration via TelnetConfiguration via SSH 70/81 71/81 Card software upgrade via Tftp Unix and Windows Software upgradeCard firmware upgrade using Mupgrade Windows English French Tables of alarms and eventsUPS Alarm table STS Alarm tableUPS event table UPS STS event table 77/81 System alarm table Glossary Telnet Subnet maskTrap Snmp

Related manuals

Manual 18 pages 57.58 Kb