Schneider Electric 66074, 66846 user manual Choice 2 UPS / STS parameters, Choice 3 Access control

Page 67

Network

Management Card

User Manual

Text field limited to 10 characters. Enables secure access to the sections of the Configuration menu. Default value “MGEUPS”.

a. Manager Password: *

Text field limited to 10 characters. Enables secure access to the sections of the Configuration menu. Default value “MGEUPS”.

b. BOOTP/DHCP Enabled: Enabled

Authorises the configuration of network parameters with your BootP/DHCP as a startup mode (choose enable). Card operating mode with the server: after all reboots, the card (if this option is enabled), attempts to recover the network parameters from the server for 10 seconds. If no response is obtained from the server, the card boots with the last parameters saved from the previous start.

0.Return to previous menu Goes back to the previous menu.

6.1.2 Choice 2: UPS / STS parameters

The blue lines are those displayed on screen.

+============================================================================+

[UPS/STS Parameters Menu] +============================================================================+

SNMP/Web Agent Version

: IAb6 (SN 49ej45007)

Ethernet address

: 00 E0 D8 0D 6F 2A

Agent BIOS Version

: 6.16

1. Log Periodicity

: 60

Value between 20 and 99999. Enables initialisation of the save frequency of Measurements, Events and

System in the Log menu. Default value = 60 sec.

2. Trap Port Number

: 162

Numeric field limited to 65534. Enables forwarding of the traps sent by the card to a port other than the one usually used for SNMP. Default value 162

3.

System Date (yyyy/mm/dd)

: 2010/01/22

Enables adjustment of the date

 

4.

System Time (hh:mm:ss)

: 12:43:21

Enables adjustment of the time

 

0.

Return to previous menu

 

6.1.3 Choice 3: Access control

+============================================================================+

IP Address Community String Access +============================================================================+

[1] 0.0.0.0

public

NotAccess

Network Management Card – User Manual

34003676EN/HA

Page 67/81

Image 67
Contents Network Management Card NMC Transverse Environment Sensor Network Management Card Appendices Tables of Alarms and Events ConfigurationConfiguration VIA Telnet Configuration VIA SSH MAINTENANCE72 Software UpgradeGlossary Introduction Connecting the UPS / STS to the NetworkNetwork Management Card Network Shutdown module only available for UPS, not for STS MGE supervisor Enterprise Power ManagerProtecting the computers / servers Monitoring the UPSs over the networkPresentation of the Network Management Cards NMC How to connect UPS / networkSetting up the protection, for UPS only ConnectionDirect sending of E-mail Presentation of the Environment Sensor solutionSending text messages SMS Technical data 10/81 Basic configuration InstallationEnvironment Sensor Optimising the performance of your browser Supervision / Administration via a Web browserUPS status zone essential information UPS / STSUPS properties UPS zone general information on the UPSBattery status zone STS zone general information on the STS STS propertiesSTS status zone essential information Sources status zone AboutOn-line help 18/81 Normal input measurements UPS 3-Phase displayBy Pass measurements Battery measurementsSTS 3-Phase display Source 2 input measurement UPS Control23/81 UPS weekly schedule programming Important note Shutdown parametersViewing the alarms UPS Measurements LogsSTS Measurements 29/81 STS Event log UPS Event log31/81 System log 33/81 UPS Email Notification NotificationNotified events Recipient List Mail message configuration see nextSTS Email Notification Other settingsSubject Email Message SettingsUPS Email Message Settings SenderSTS Email Message Settings Email Example User Name and password by default are Mgeups ConfigurationNetwork Settings 42/81 System 44/81 UPS Notified Applications 46/81 Central Shutdown Configuration STS Notified Applications 49/81 Access control 51/81 Access is disabled and the card is accessible in SSH Time Status Configuration Log CharacteristicsEnvironment Environment status 56/81 UPS Environment Settings UPS Environment SettingsHumidity STS Environment Settings4 Log Shutdown criteria managed by the Management Card Set-up of the shutdown parametersShutdown when backup time is less than Specific set-up for long autonomy installation 30 mnShutdown duration Different server and UPS shutdown sequences 63/81 4 Off/On command Configuration in local mode Configuring a set of cards with MupgradeMgeups Choice 1 Snmp agent configuration menuChoice 2 UPS / STS parameters Choice 3 Access controlChoice 5 Reset the card Choice 4 Restore default configurationConfiguration via SSH Configuration via TelnetPuTTY SSH Client Program 70/81 71/81 Card firmware upgrade using Mupgrade Windows Software upgradeCard software upgrade via Tftp Unix and Windows English French Tables of alarms and eventsUPS Alarm table STS Alarm tableUPS event table UPS STS event table 77/81 System alarm table Glossary Telnet Subnet maskTrap Snmp
Related manuals
Manual 18 pages 57.58 Kb