Schneider Electric 66074, 66846 user manual Technical data

Network

Management Card

User Manual

1.7Technical data

1.7.1 Configuration

The user can configure the card with one of the following means:

◗Web browser

◗Local serial link

◗Telnet console

◗BOOTP/DHCP

◗Mupgrade

1.7.2 Administration

◗Up to 50 workstations protected

◗Up to 15 browsers connected at the same time

◗E-mail sending configurable according to UPS alarms and transmission of a periodical report

◗Measurement of temperature and humidity, adjustable thresholds, possibility of sending e-mails and shutting down the installation

◗Control of UPS on/off switching via the HTML interface

◗Adjustment and control Power via the HTML interface, sequential starting of the installation and optimisation of backup time by shutting down non-priority systems

◗Adjustment of date and time via NTP server - Daylight Saving Time management

◗Protection by encrypted password.

◗Protection by secured connection SSL and SSH

◗Saving of logs in the non-volatile memory

◗Automatic language detection according to browser configuration.

◗Languages available: English / French / Spanish / German / Italian

◗On-line help available for each page

◗Card firmware updated via the network

◗Card configuration deployment on your installed base through network utility (Mupgrade)

1.7.3 Network

◗Fast ETHERNET 10/100 Mbits compatibility with auto-negotiation on the RJ45 outlet

◗SNMP trap port modifiable (by default = 162)

1.7.4 MIB (Management Information Base)

◗MIB IETF UPS (RFC1628) for UPS

◗MIB MGE V1.7 AD, for UPS

◗MIB MGE V2.2 AA, for STS

1.7.5 Environment sensor

◗Temperature measurement from 0 to 70 °C with +/- 1° C accuracy

◗Measurement of humidity from 0 to 100 % with +/- 6 % accuracy

◗Min / max time-stamped function for temperature and humidity

◗Choice of temperature readings in Celsius or Fahrenheit

◗High and low thresholds, hysteresis and offset adjustable via Web interface

Network Management Card – User Manual 34003676EN/HA Page 9/81