Network
Management Card
User Manual
3.2.2 “STS properties” page
◗This page gives instant access to the essential information about your STS. This page is automatically refreshed every 10 seconds (by default).
To change this value, go to the “System” page.
3.2.2.1 STS zone: general information on the STS.
Indication of the picture and generic name of the UPS range
Computer room: Customised name of your system corresponding to the “upsIdentName” object of the UPS MIB (RFC 1628)
You can change this name on the “System” page.
∙
∙
∙Normal operation
∙Alarm present. This icon links directly to the alarm page
3.2.2.2 “STS status” zone: essential information
◗The various icons showing the status of the UPS are:
∙
∙Loss of communication with the STS
Network Management Card – User Manual | 34003676EN/HA | Page 15/81 |