Schneider Electric 66846, 66074 user manual UPS weekly schedule programming

Page 24

Network

Management Card

User Manual

3.2.8UPS weekly schedule programming

Click on the “Weekly schedule” section of the menu.

If the UPS is not compatible with this function, a warning message is sent to the user.

UPS configuration may also prevent the commands from being properly run. Read the UPS manual for more information.

The weekly schedule enables the administrator to optimise power consumption or program a reboot of the protected equipment at a set time.

In a shutdown sequence, the Network Shutdown Modules connected to the card are informed and ensure that each machine is shut down correctly before the UPS output is switched off (dependant of the UPS settings and UPS type).

Up to 7 UPS shutdown sequences (dependant of the UPS settings and UPS type) can be programmed in one week, with a minimum shutdown delay of 30 minutes.

Security: the administrator clicks on Save” and enters his/her login / password to save any edits. The login

and password by default are: MGEUPS.

Network Management Card – User Manual

34003676EN/HA

Page 24/81

Image 24
Contents Network Management Card NMC Transverse Environment Sensor Network Management Card Configuration Configuration VIA Telnet Configuration VIA SSHMAINTENANCE72 Software Upgrade Appendices Tables of Alarms and EventsGlossary Connecting the UPS / STS to the Network IntroductionNetwork Management Card MGE supervisor Enterprise Power Manager Protecting the computers / serversMonitoring the UPSs over the network Network Shutdown module only available for UPS, not for STSHow to connect UPS / network Setting up the protection, for UPS onlyConnection Presentation of the Network Management Cards NMCPresentation of the Environment Sensor solution Direct sending of E-mailSending text messages SMS Technical data 10/81 Installation Basic configurationEnvironment Sensor Supervision / Administration via a Web browser Optimising the performance of your browserUPS / STS UPS propertiesUPS zone general information on the UPS UPS status zone essential informationBattery status zone STS properties STS zone general information on the STSSTS status zone essential information About Sources status zoneOn-line help 18/81 UPS 3-Phase display Normal input measurementsBattery measurements By Pass measurementsSTS 3-Phase display UPS Control Source 2 input measurement23/81 UPS weekly schedule programming Shutdown parameters Important noteViewing the alarms Logs UPS MeasurementsSTS Measurements 29/81 UPS Event log STS Event log31/81 System log 33/81 Notification UPS Email NotificationNotified events Mail message configuration see next Recipient ListOther settings STS Email NotificationEmail Message Settings UPS Email Message SettingsSender SubjectSTS Email Message Settings Email Example Configuration User Name and password by default are MgeupsNetwork Settings 42/81 System 44/81 UPS Notified Applications 46/81 Central Shutdown Configuration STS Notified Applications 49/81 Access control 51/81 Access is disabled and the card is accessible in SSH Time Characteristics Status Configuration LogEnvironment Environment status 56/81 UPS Environment Settings UPS Environment SettingsSTS Environment Settings Humidity4 Log Set-up of the shutdown parameters Shutdown criteria managed by the Management CardSpecific set-up for long autonomy installation 30 mn Shutdown when backup time is less thanShutdown duration Different server and UPS shutdown sequences 63/81 4 Off/On command Configuring a set of cards with Mupgrade Configuration in local modeChoice 1 Snmp agent configuration menu MgeupsChoice 3 Access control Choice 2 UPS / STS parametersChoice 4 Restore default configuration Choice 5 Reset the cardConfiguration via Telnet Configuration via SSHPuTTY SSH Client Program 70/81 71/81 Software upgrade Card firmware upgrade using Mupgrade WindowsCard software upgrade via Tftp Unix and Windows Tables of alarms and events UPS Alarm tableSTS Alarm table English FrenchUPS event table UPS STS event table 77/81 System alarm table Glossary Subnet mask TelnetTrap Snmp
Related manuals
Manual 18 pages 57.58 Kb