Network Management Card
User Manual
∙
∙
∙
∙
∙Battery operation
∙Load powered by main AC
∙Loss of communication with the UPS
∙Battery fault
“Communication” : indicates the status of the communication between the card and the UPS
“Power source” : indicates whether the power comes from the utility or from the UPS battery
“Batteries” : indicates whether the battery is being charged or discharged
“Output load level” : indicates the power percentage used at UPS output
“Output” : indicates if the UPS output is protected, Powered or not Powered
3.2.1.3 “Battery status” zone:
◗“Bargraph”: Graph showing the remaining battery charge (in percent).
◗“Battery charge level” : Remaining battery charge (in percent).
◗“Remaining backup time” : Estimation of the maximum backup time remaining before UPS shutdown. This time can be modified by the adjustments on the “Shutdown parameters” page
◗“Last periodical test”: Result of the last automatic battery test carried out by the UPS
Possible values are:
-OK: the test was completed correctly
– NOK: the battery needs to be checked
– Deactivated: the automatic battery test is not validated on the UPS
Network Management Card – User Manual | 34003676EN/HA | Page 14/81 |