Schneider Electric 66846, 66074 user manual STS Measurements

Page 28

Network

Management Card

User Manual

3.3.2 STS Measurements

Click on the “Measurements” section in the menu.

The following measurements are saved and time-stamped:

◗“Source 1 voltage” : Value of the utility voltage supplying your STS (value of the first phase)

◗“Source 1 frequency” : Value of the utility frequency feeding your STS

◗“Source 2 voltage” : Value of the utility voltage supplying your STS (value of the first phase)

◗“Source 2 frequency” : Value of the utility frequency feeding your STS

◗“Output voltage”: Value of the output voltage of your STS (value of the first phase)

◗“Output load” : Value of the percentage of load at STS output (value of loaded for the 3-phase)

◗“ Output current Ph x”: Value of the output current for each phase on three-phase STSs

◗The save frequency of these values is defined in the “System” page (60 seconds by default). Approximately 1000 time-stamps are stored permanently on the card. The oldest time-stamps are automatically deleted.

◗“Save” enables all saved values to be opened or saved in CSV format (compatible with Excel type

spreadsheets)

“Clear” enables deletion of all records. The administrator must enter his login / password to validate this action if he has not already done so during the current session.

Network Management Card – User Manual

34003676EN/HA

Page 28/81

Image 28

Contents Network Management Card NMC Transverse Environment Sensor Network Management Card Configuration Configuration VIA Telnet Configuration VIA SSHMAINTENANCE72 Software Upgrade Appendices Tables of Alarms and EventsGlossary Introduction Connecting the UPS / STS to the NetworkNetwork Management Card MGE supervisor Enterprise Power Manager Protecting the computers / serversMonitoring the UPSs over the network Network Shutdown module only available for UPS, not for STSHow to connect UPS / network Setting up the protection, for UPS onlyConnection Presentation of the Network Management Cards NMCDirect sending of E-mail Presentation of the Environment Sensor solutionSending text messages SMS Technical data 10/81 Basic configuration InstallationEnvironment Sensor Supervision / Administration via a Web browser Optimising the performance of your browserUPS / STS UPS propertiesUPS zone general information on the UPS UPS status zone essential informationBattery status zone STS zone general information on the STS STS propertiesSTS status zone essential information About Sources status zoneOn-line help 18/81 UPS 3-Phase display Normal input measurementsBattery measurements By Pass measurementsSTS 3-Phase display UPS Control Source 2 input measurement23/81 UPS weekly schedule programming Shutdown parameters Important noteViewing the alarms Logs UPS MeasurementsSTS Measurements 29/81 UPS Event log STS Event log31/81 System log 33/81 UPS Email Notification NotificationNotified events Mail message configuration see next Recipient ListOther settings STS Email NotificationEmail Message Settings UPS Email Message SettingsSender SubjectSTS Email Message Settings Email Example Configuration User Name and password by default are MgeupsNetwork Settings 42/81 System 44/81 UPS Notified Applications 46/81 Central Shutdown Configuration STS Notified Applications 49/81 Access control 51/81 Access is disabled and the card is accessible in SSH Time Status Configuration Log CharacteristicsEnvironment Environment status 56/81 UPS Environment Settings UPS Environment SettingsSTS Environment Settings Humidity4 Log Set-up of the shutdown parameters Shutdown criteria managed by the Management CardShutdown when backup time is less than Specific set-up for long autonomy installation 30 mnShutdown duration Different server and UPS shutdown sequences 63/81 4 Off/On command Configuring a set of cards with Mupgrade Configuration in local modeChoice 1 Snmp agent configuration menu MgeupsChoice 3 Access control Choice 2 UPS / STS parametersChoice 4 Restore default configuration Choice 5 Reset the cardConfiguration via SSH Configuration via TelnetPuTTY SSH Client Program 70/81 71/81 Card firmware upgrade using Mupgrade Windows Software upgradeCard software upgrade via Tftp Unix and Windows Tables of alarms and events UPS Alarm tableSTS Alarm table English FrenchUPS event table UPS STS event table 77/81 System alarm table Glossary Subnet mask TelnetTrap Snmp

Related manuals

Manual 18 pages 57.58 Kb