Other Handy Functions
Other Handy Functions |
Entering titles
Titles up to 10 characters long can be stored in memory and displayed for TV stations. The num- bers of titles that can be entered for each mode are as follows.
Mode | Number of titles |
TV mode | 15 titles |
|
|
CD changer mode | Number of titles |
Adjusting the display contrast
You can adjust the display contrast to match the angle of installation of the unit.
∗The factory default setting is “8”. (Adjustment level: 1 to 18)
1. | Press and hold ADJ button 2 for 1 second or |
| longer to switch to the adjustment selection display. |
2. | Press the right or left side of SEARCH button |
| % to select “CONTRAST”. |
3. | Turn the Rotary knob ( clockwise or coun- |
∗ The factory default setting is “ON”. | Setting the method for Ttitle scroll | |
∗ Even if the level adjustment display is set to “OFF”, | Set how to scroll in | |
signals can be output from the external output. | ||
∗ The factory default setting is “ON”. | ||
1. Press and hold ADJ button 2 for 1 second or | ||
1. Press and hold the ADJ button 2 for 1 sec- | ||
longer to switch to the adjustment selection display. | ||
2. Press the right or left side of SEARCH button | ond or longer to set Adjust mode. | |
2. Press the SEARCH button % and select | ||
% to select | ||
3. Turn the Rotary knob ( clockwise to set “ON” | “AUTO SCROLL”. | |
3. Turn the Rotary knob ( clockwise or coun- | ||
or counterclockwise to set “OFF”. | ||
● ON: | terclockwise and select “ON” or “OFF”. |
CDC655z connected | 60 titles |
CDC655Tz connected | 100 titles |
CDC1255z connected | 50 titles |
1. | Press FNC button 3 to select the mode you |
| want to enter a title (CD changer or TV). |
2. | Select and play a CD in the CD changer or |
| tune in to a TV station for which you want to |
terclockwise to adjust the contrast. |
4. Press ADJ button 2 to return to the previous |
mode. |
Adjusting the dimmer level
You can adjust the reduced illumination level of the dimmer.
When you press
∗The output level can be adjusted.
● OFF:
Even when you press
∗The output level cannot be adjusted.
●ON:
To scroll automatically.
●OFF:
To scroll just 1 time when the title was changed or the title key was pressed.
4. Press ADJ button 2 to return the previous mode.
| enter the title. |
3. | Press DISP button # and display the main. |
4. | Press TITLE button 2. “TTL” appears in the |
| display and the cursor position flashes. |
5. | Press the right or left side of SEARCH button |
| % to move the cursor. |
6. | Press DISP button # to select a character. |
| Each time you press DISP button #, the char- |
| acter changes in the following order: |
| Capital letters ➜ Small letters ➜ Numbers and |
| Symbols ➜ Umlaut ➜ Capital letters... |
7. | Turn the Rotary knob ( to select the desired |
∗The factory default setting is “3”.
∗To use the dimmer, set the dimmer setting to 1 to 5. 1. Press and hold ADJ button 2 for 1 second or longer
to switch to the adjustment selection display.
2. | Press the right or left side of SEARCH button |
| % to select “DIMMER LV”. |
3. | Turn the Rotary knob ( clockwise or coun- |
| terclockwise to adjust the reduced illumina- |
| tion level of the dimmer. |
| ● 1 to 5: |
| The dimmer operation is performed depend- |
| ing on the set level 1 to 5. |
| ● OFF: |
4.Press ADJ button 2 to return to the previous mode.
AUX function
This system has an external input jack so you can listen to sounds and music from external devices when connected to this unit.
Selecting AUX IN sensitivity
Make the following settings to select the sensi- tivity when sounds from external devices con- nected to this unit are difficult to hear even after adjusting the volume.
Switching the screen saver
∗The factory default setting is “RANDOM”.
1.Press and hold the ADJ button 2 for 1 sec- ond or longer to set Adjust mode.
2.Press the SEARCH button % and select “AUTO SS”.
3.Turn the Rotary knob ( clockwise or coun- terclockwise as needed to switch to “SS OFF” “SS Ptn1” 
“SS Ptn2” 
“SS Ptn3” 
“SS RANDOM” 
“SS OFF”
4.Press ADJ button 2 to return the previous mode.
| character. Turning the Rotary knob ( clock- |
| wise moves the cursor to the next character; |
| turning it counterclockwise moves the cursor |
| to the previous character. |
8. | Repeat steps 5 to 7 to enter up to 10 charac- |
| ters for the title. |
9. | Press and hold ENT button & for 2 seconds |
| or longer to store the title into memory and |
| cancel title input mode. |
Clearing titles
1.Select and play a CD in the CD changer or tune in to a TV station for which you want to clear the title.
2.Press DISP button # and display the main.
3.Press TITLE button 2. “TTL” appears in the dis- play and the display switches to title input display.
4.Press BND button ".
5.Press and hold ENT button & for 2 seconds or longer to clear the title and cancel title input mode.
No dimmer operation is performed. |
4. Press ADJ button 2to return to the previous mode. |
Message display
When the unit is powered on or off, a message is displayed. The user can turn this message dis- play ON or OFF.
∗The factory default setting is “ON”.
1.Press and hold ADJ button 2 for 1 second or longer to switch to the adjustment selection display.
2.Press the right or left side of SEARCH button % to select “MESSAGE”.
3.Turn the Rotary knob ( clockwise or counter- clockwise to set message display ON or OFF.
4.Press ADJ button 2to return to the previous mode.
Turning the external output adjustment display on/off
When not using the external output, you can put out the
1.Press and hold the ADJ button 2 for 1 second or longer to set Adjust mode.
2.Press the SEARCH button % and select “AUX SENS”.
3.Turn the Rotary knob ( clockwise or coun- terclockwise as needed and select from “SENS HIGH”, “SENS MID” or “SENS LOW”.
∗ The factory default setting is “SENS MID”.
4.Press ADJ button 2 to return the previous mode.
Setting the button illumination
∗The factory default setting is “ILLM GREEN”.
1.Press and hold the ADJ button 2 for 1 sec- ond or longer to set Adjust mode.
2.Press the SEARCH button % and select “KEY ILLUMI”.
3.Turn the Rotary knob ( clockwise or coun- terclockwise as needed and select from “ILLM GREEN” and “ILLM RED”.
4.Press ADJ button 2 to return the previous mode.
Setteng the clock
1.Press and hold the ADJ button 2 for 1 sec- ond or longer to set Adjust mode.
2.Press the SEARCH button % and select “CLOCK”.
3.Press ENT button & .
4.Press the SEARCH button % to select the hour or the minute.
5.Turn the Rotaly knob ( clockwise or counterclockwise to set the correct time.
∗The clock is displayed in
6.Press ENT button & to store the time into memory.
7.Press ADJ button 2 to return the previous mode.
Note:
•You cannot set the clock when it is displayed with only the ignition on.If you drain or remove the car’s battery or take out this unit, the clock is reset. While setting the clock, if another button or operation is selected, the clock set mode is canceled.
16 |