AC Processor Operations
Selecting a P.EQ menu
1. | Press |
| blinks in the display. |
2. | Press BND button " to select “BASC” (ba- |
| sic). “BASC” is displayed in the operation |
| status indication - in the display. |
Note: Be sure to read this chapter referring to the front diagrams of chapter “3.CONTROLS” on page 5 (unfold).
Digital Radio / DAB Operations
DAB control function | Seek tuning | |
When a CeNET cable is used to connect a DAB | 1. | Press FNC button 3 to select DAB mode. |
(DAH913) (sold separetely), all functions can be | 2. | Press and hold right or left for 1 second or |
| ||
operated. | longer using SEARCH button %. |
|
3. Press one of Direct buttons 9 and select the |
desired P.EQ menu. |
∗ To select the user memory, press BND button |
" to select “USR” and press one of Direct |
buttons 9. |
Editing/storing a P.EQ menu (User memory)
Listening to the DAB station
1.Press FNC button 3 to select DAB mode.
2.When the unit receives a DAB station, the display changes in the following order: Frequency channel ➜ service label
∗“SEEK” appears in the display.
3.“DAB” lights up in the display when the main unit receives a DAB station.
∗The main unit stops the seek tuning when it cannot find a DAB station. The display returns to the previous mode.
1.Select a P.EQ menu which you want to edit on the basis of.
2.Press and hold ADJ button 2 for 1 second or longer.
3.Press the right or left side of SEARCH button % to select the item to be adjusted.
There are correction channel, correction band, selection of the centre frequency, gain adjust- ment and selection of the
∗For details on each adjustment item, refer to the owner’s manual supplied with the DPH910.
4.Turn the Rotary knob ( clockwise or counter- clockwise to make the adjustment.
5.Repeat steps 3 to 4 to complete the adjust- ment and press ADJ button 2.
6.Press and hold one of Direct buttons 9 for 2 seconds or longer to store the edited contents.
∗You can give a title to the user memory. For the inputting method of titles, refer to the subsection “Entering titles” in section “Opera- tions common to each mode”.
Switching displays
Press the DISP button for 1 second during the Main (service label) display to select Main (ser- vice label) or Sub (PTY).
Note:
•The display shown in the normal reception mode and the preset reception mode is the same when a DAB station is received.
3.When the unit does not receive a DAB station, the display changes in the following order:
–Normal reception mode–
–Preset reception mode–
Notes:
•The number of programmes and broadcasting times depend on the DAB stations.
•When the strength of DAB signals is weak, audio output is muted.
Manual tuning
1.Press FNC button 3 to select DAB mode.
2.Press and hold BND button " for 1 second or longer. “MANU” lights up in the display.
3.Press the right or left SEARCH button % to select a station.
∗If no operation is performed for more than 7 seconds, manual tuning is cancelled and the display returns to the previous mode.
Switching programmes
1.Press FNC button 3 to receive a DAB station.
2.Press the right or left SEARCH button % to switch programmes in the DAB station.
Note:
•The programme name may be the same depending on DAB programmes.
Programme scan
This function scans through each receivable programme in a DAB station being received for 10 seconds sequentially. This is useful when you want to search for a desired programme.
1.Press FNC button 3 to receive a DAB station.
2.Perform the following operation depending on the connected model.
Press SCN button 5. “SCAN” lights up and the unit starts scanning each programme for 10 seconds sequentially. Each time the main unit scans, the programme name is shown in the display.
3.To stop programme scan when a desired programme is tuned in.
Press SCN button 5.
26 |