Liebert 610 manual System Configuration Screens, System configuration screens

Operation

3.2.5System Configuration Screens

Go to the Master Menu and move the highlighted cursor to SYSTEM CONFIGURATION. Press the Select pad and the System Configuration screen is displayed.

The System Configuration screen lists parameters that can be changed to adjust your UPS module to your site requirements. Some of the information displayed is factory-set and should only be changed by Liebert Global Services. Parameters that should be adjusted by the user include date, time, auto dial number and modem baud rate.

The System Configuration screen is one of the displays that has controlled access to limit who is able to change site parameters. This type of screen is called a Security Access screen. This controlled access feature allows anyone to review the present parameters, but limits access for making changes. When you see Security Access displayed on the screen (upper left corner), to make authorized changes you must open the control cabinet door (key required) and push the Interlock button on the back of the control panel (Figure 3). Close and lock the control cabinet door after making authorized changes.

Figure 20 System configuration screens

SECURITY ACCESS

EXIT

SYSTEM CONFIGURATION

UP: CURSOR UP

DOWN: CURSOR DOWN

SELECT: CHOOSE

Part Number	02-791625-64
Order Number	000000
Site ID Number	00000
Site TAG Number	0000000
System Number	1
Max Auto-Rexfer Attempts	3
Date	01/17/03
Time	14:51:59
Auto Dial	YES
Language Selection	English	Version 3.02.0
System Options
		Copyright© 1989-2003

Liebert Corporation

All Rights Reserved

NOTE

If you mistakenly set a site parameter digit to an incorrect value, you must return to the System Configuration screen, and then go to the required screen to reset the value.

Part Number: This is a factory-set part number of the UPS cabinet, which determines many internal operating parameters. It cannot be changed.

Order Number: This is a factory-set number to identify your particular installation.

System Number: This number is used to identify one or more UPS systems that may be present on one site.

32