Liebert 1000kVA System Current Rating, Language Selection, System Options, Retransfer Attempts

Operation

To change the Maximum Auto-Retransfer Attempts parameter, do the following at the SCC:

1.From the System Configuration Screen, press the Up or Down pad to highlight Maximum Auto-

Retransfer Attempts.

2.Press the Select pad. The screen above will appear.

3.Press the Up pad to increase the value or the Down pad to decrease it.

4.Press the Select pad to set the value and to return to the System Configuration screen.

System Current Rating

System current rating is determined by the part number, which is entered at the factory and cannot be changed. Once it has been entered, the part number determines the value displayed for the System Current Rating on the SCC system configuration screen (see Figure 29).

Language Selection

English and Portuguese are supported.

System Options

Figure 35 SCC system options screen

		UP: CURSOR UP
		DOWN: CURSOR DOWN
		SELECT: CHOOSE
	SYSTEM OPTIONS
EXIT
LCD Contrast
Backlight Brightness
Customer Alarm Interface Board		NO
Continuous Duty Static Switch		YES

Figure 36 MMU system options screen

		UP: CURSOR UP
		DOWN: CURSOR DOWN
		SELECT: CHOOSE
	SYSTEM OPTIONS
EXIT
LCD Contrast
Backlight Brightness
Battery Temp. Compensated Charging		NO
Battery Test		YES

49