Installation Instructions
WASHER CONNECTIONS FOR PORTABLE MODEL WSLP1500—
If you have two separate water connections, your washer can be connected to both the hot and cold water faucets. This kit can be purchased from your dealer or from Parts and Accessories. In the United States, call 800.626.2002. In Canada, consult the yellow pages for your local Camco number.
TO CONNECT THE WASHER:
1CONNECT TO WATER LINE
Connect HOT and COLD water inlet hoses to the HOT and COLD faucets.
2CONNECT DRAIN HOSE
Secure the drain hose to the sink or stand pipe.
Cable
Tie
Cable
Tie
Sink | Stand Pipe |
3PLUG THE POWER CORD INTO A
Insure proper ground exists before use
4INSTALLATION CHECKLIST
Before starting the washer, check to make sure:
❏Main power is turned on.
❏The washer is plugged in.
❏The water faucets are turned on.
❏The unit is level.
❏The drain hose is properly tied up.
❏There are no leaks at the faucet, drain line or washer.
TO DISCONNECT THE WASHER:
1 TURN WATER FAUCETS OFF
2UNPLUG POWER CORD AND RETURN IT TO THE STORAGE AREA
3
DISCONNECT THE DRAIN AND WATER SUPPLY HOSES
Hang them on the storage rack.
16