Logicube Omniclone Xi user manual Clever Clone Mode, Clever Clone Step-by-Step

CLONING MODES AND SETTINGS

NOTE: Each time the Logicube Omniclone Xi™ is rebooted the cloning mode and preference settings are saved from the last cloning session.

Clever Clone™ Mode

This is the default mode. It clones ALL partitions on the Master drive to the Target drives, automatically deciding the fastest method possible for each parti- tion found. It scales all known partitions (At this writing – FAT16/32, and NTFS2) to fill the Target in its entirety and makes all the necessary adjust- ments to ensure valid and bootable Target drives.

NOTE: Any unrecognizable partition is automatically cloned with Mirror Clone mode. This includes non-Windows partitions like Linux, Unix, BSD and other partition types.

Clever Clone™ Step-by-Step

1.From anywhere in the menu system click the “Set” button to enter the Settings menu.

2.Press the Cloning Mode icon that appears in the upper left-hand corner. A list of the available cloning modes appears.

3.Press the “Clever” icon, the Clever Clone™ settings screen will appear.

4.Adjust the “Verify”, “CHS” and “SPEED” settings as needed. (These settings are discussed later in this chapter).

5.You may now double-click the “Start/Stop” button to start cloning.

NOTE: When Clever Clone™ scales down an NTFS partition, it can only scale it to 55% of the original size.

Selective Partitions™ Mode (Optional)

This is the most elaborate and most flexible mode. It allows the highest level of control over the cloning process.

Selective mode allows you to select one or multiple partitions to clone. It also allows you to choose a

2NTFS Clevercopy￿ is an option that can be purchased for the Omniclone Xi￿.

14 Logicube Omniclone Xi ™ User’s Manual