Logicube Omniclone Xi user manual Compact Flash CF Card, Introduction

8. Compact Flash (CF) Card

Introduction

The Logicube Omniclone Xi™ comes with a 64MB Compact Flash (CF) Drive that is inserted in a CF slot at the back of the unit. This little drive is used mostly for loading software on the Logicube Omniclone Xi™, but it has other functions such as storage for the Database/Barcode Option.

NOTE: It is highly recommended that the CF Card be left inside the Omniclone-Xi for optimal performance.

NOTE: Please check our website periodically at www.logicube.com, any new CF functions will be posted there.

To load new software from the CF Drive, please refer to the procedure “Loading Software Using the Compact Flash” which is found in Chapter 9:

Software loading Instructions.

Inserting and Removing the Compact Flash

1.At the back of the Logicube Omniclone Xi™ is a Compact Flash (CF) slot. Make sure that it is clear.

2.Hold the CF Drive so that the Logicube label faces up.

3.Slide the CF Drive into the CF slot. As it slides into place, the eject button will slide out.

4.To remove the CF Drive, simply press in the eject button. The drive will slide out.

Logicube Omniclone Xi ™ User’s Manual 43