CLONING MODES AND SETTINGS
unique copy method3 to use for each. The available methods are:
Clever Clone™ – The default mode that lets the Omniclone Xi™ determine the best (usually fastest) way to clone. It is denoted by the light bulb icon. It works with all FAT16/FAT32 and NTFS type partitions.
NOTE: NTFS Clever Copy™ is an optional feature and will only be available if purchased and installed on your unit.
Defragment – Forces the defragmentation of all partition data. This mode uses an advanced defragmentation algorithm to create a Target partition with no gaps and with contiguous files. It works with FAT16/FAT32. Defragmentation is a rather slow process and should be used only when a single copy is required of a given Master drive. In cases where multiple copies are desired, it is much better to use a defragmentation program on the PC for the Master and then move the Master drive onto the Omniclone Xi™.
NOTE: Clever Copy™ mode will resort to the defragmentation method if the given partition is FAT16 and a cluster size change is required to create a valid Target partition.
Partition Mirror – Simply streams over the full contents of the selected partition without allowing any partition scaling (Do not confuse this mode with the Mirror copy mode which mirrors the entire Master drive). This method is available for any partition type. This is the only method available to unrecognized partitions.
Selective Partitions™ Step-by-Step
1.From anywhere in the menu system click the “Set” button to enter the Settings menu.
2.Press the Cloning Mode icon that appears in the upper
3.Press the “Selective” icon, the unit will immediately power the Master drive and display the partition table.
3Note that not all modes are available for all partition types.
Logicube Omniclone Xi ™ User’s Manual | 15 |